-Now clone the forked repository to your machine. Go to your GitHub account, open the forked repository, click on the code button, then on SSH tab and then click the _copy to clipboard_ icon.
+Now clone the forked repository to your machine. Go to your GitHub account, open the forked repository, click on the code button, then on SSH tab and then click the _copy url to clipboard_ icon.
Open a terminal and run the following git command:
diff --git a/docs/additional-material/Things a non Programmer can do.eg.md b/docs/additional-material/Things a non Programmer can do.eg.md
new file mode 100644
index 00000000..af89e2a5
--- /dev/null
+++ b/docs/additional-material/Things a non Programmer can do.eg.md
@@ -0,0 +1,164 @@
+# حاجات ممكن اللي مش مبرمج يعملها
+## اسمع الأول
+
+كل حاجة في الـ Open Source بتعتمد على الناس اللي شغالة فيها.
+إنت عايز تنضم لفريق، وده معناه إنك تفهم المجتمع شغال إزاي.
+لو دخلت على مشروع وقلت "هاي، أنا شايف إن المشروع المفروض يعمل كذا" غالبًا ده مش هيكون مقبول.
+ممكن مشاريع معينة تكون بتحب الأسلوب ده، لكن لو المشروع ليه فترة شغال، نسبة إن الناس تتقبل الكلام ده قليلة.
+**أحسن حاجة تعملها في الأول إنك تسمع وتشوف الناس شغالة إزاي.**
+
+1. **اشترك في Mailing List**: في مشاريع كتير، الـ mailing list هي وسيلة التواصل الرئيسية بين الناس اللي بتطور المشروع.
+في المشاريع الكبيرة، هتلاقي كذا mailing list.
+مثلاً، مشروع PostgreSQL عنده أكتر من 12 mailing list للمستخدمين و6 للمطورين.
+ابدأ بمتابعة الـ list الأساسية للمستخدمين وواحدة من بتوع المطورين علشان تفهم اللي بيحصل.
+
+2. **تابع Blog**: المطورين الكبار غالبًا بيكتبوا تدوينات بيشرحوا فيها اللي هيحصل في النسخ الجاية،
+وبيتكلموا عن اللي اتعمل علشان نوصل للمرحلة دي.
+في مواقع اسمها Planet بتجمع التدوينات والأخبار من كذا مصدر عن المشروع.
+لو فيه planet زي planet.gnome.org أو planet.mysql.com، يبقى ده مكان كويس تبدأ منه.
+اكتب في جوجل "planet <اسم المشروع>".
+
+3. **ادخل على قناة IRC**: معظم مشاريع الـ Open Source عندها قنوات IRC الناس بتدخل تتكلم فيها عن المشاكل والتطوير.
+ادخل على موقع المشروع وشوف اسم القناة على أي شبكة IRC.
+
+**اشتغل على التذاكر**
+الكود هو الأساس في أي مشروع مفتوح المصدر، بس ده مش معناه إن الكود هو الطريقة الوحيدة اللي ممكن تساهم بيها.
+فيه حاجات تانية كتير الناس بتكسل تعملها، زي صيانة النظام أو متابعة المشاكل.
+ابدأ من هنا وهتلاقي نفسك بقيت جزء من الفريق.
+
+معظم المشاريع عندها نظام تذاكر على الموقع الرسمي.
+ده بيكون وسيلة تواصل بين الناس اللي بتستخدم البرنامج والمطورين.
+تنضيف التذاكر دي وتحديثها بيساعد الفريق جدًا.
+
+ممكن تحتاج صلاحيات علشان تعدل على التذاكر، بس صدقني، أول ما تقول إنك عايز تساعد، هيدوك الصلاحيات دي على طول.
+
+4. **حلل مشكلة (Bug)**: ساعات الناس بتبلّغ عن مشاكل بشكل مش واضح.
+لو حد قال "البرنامج بيهنّج لما بعمل كذا"، خد وقتك وحاول تعرف المشكلة دي بتحصل إزاي.
+هل بتتكرر؟ تقدر تكتب خطوات تثبت بيها إنها بتحصل؟ بتحصل على متصفح معين؟ ولا في نظام تشغيل معين؟
+
+حتى لو معرفتش تحلها، إنك توضّح المشكلة أكتر بيسهّل على حد تاني ييجي يحلها.
+وكل اللي تكتشفه، اكتبه في التذكرة علشان غيرك يستفيد.
+
+5. **اقفل التذاكر القديمة**: كتير من المشاكل بتكون اتحلت، بس التذاكر لسه مفتوحة.
+البحث في التذاكر القديمة وتنضيفها حاجة مهمة جدًا.
+
+ابدأ بدور على تذاكر بقالها أكتر من سنة وشوف هل المشكلة لسه موجودة ولا اتصلحت.
+راجع سجل التغييرات في الإصدارات وشوف لو فيه ذكر للمشكلة.
+لو اتحلت، اكتب رقم النسخة في التذكرة واقفلها.
+
+جرّب تعيد المشكلة في آخر نسخة من البرنامج.
+لو مشتغلتش، اكتب ده في التذكرة واقفلها.
+لو لسه موجودة، اكتبه برضو وسيب التذكرة مفتوحة.
+
+## الشغل على الكود
+الناس اللي عندها خبرة مختلفة في البرمجة تقدر تساعد في الكود.
+مش لازم تكون مبرمج جامد علشان تساهم.
+
+لو ناوي تعدل على الكود، اعرف الأول المشروع بيشتغل إزاي في موضوع استلام التعديلات.
+كل مشروع ليه طريقة معينة، فاسأل الأول.
+
+مثلاً، PostgreSQL بيستقبل التعديلات على شكل Patch في mailing list، والمطورين بيراجعوها كويس جدًا.
+لكن في مشروع زي Parrot، ممكن تاخد صلاحيات التعديل بسهولة.
+لو المشروع على GitHub، غالبًا بيستخدموا Pull Requests.
+كل مشروع وليه طريقته.
+
+لما تعدل حاجة، خليك محترم مع باقي الفريق وحافظ على تنسيق الكود زي ما هو.
+ما تحاولش تفرض أسلوبك.
+الكود اللي بتكتبه لازم يشبه اللي موجود، حتى لو مش عاجبك.
+
+6. **اختبر نسخة Beta أو Release Candidate**:
+المشاريع اللي بتشتغل على كذا نظام تشغيل ساعات بيكون فيها مشاكل توافق.
+قبل الإصدارات، المطورين بينزلوا نسخ تجريبية علشان الناس تجربها.
+لو شغّلت البرنامج على نظام تشغيل مختلف واشتغل، ده بيساعدهم يعرفوا إن النسخة كويسة.
+
+مش لازم تعمل حاجة غير إنك تبني البرنامج وتفتحه وتجربه.
+لو شغال، بلغهم.
+ده بيفرق كتير جدًا مع المطورين.
+
+7. **صلّح Bug**: ده غالبًا أول حاجة الناس بتعملها لما تبدأ تشتغل في الكود.
+دور على Bug شكله بسيط، وجرب تصلحه.
+اكتب ملاحظاتك جوه الكود، ولو في Test يوضح إن المشكلة اتحلت، ضيفه.
+لو معرفتش تصلحها، اكتب اللي وصلتله في التذكرة.
+
+8. **اكتب Test**:
+معظم المشاريع عندها Tests، بس دايمًا فيه مكان لإضافة تانية.
+استخدم أدوات بتقيس مدى التغطية، زي `gcov` أو `Devel::Cover`.
+وشوف أجزاء الكود اللي مش متغطية، وضيف لها Test.
+
+9. **اسكت تحذير من الكومبايلر**:
+لما تبني برامج C، ممكن يطلعلك تحذيرات.
+مش دايمًا معناها إن فيه مشكلة، بس بتشوّش.
+لو شفت تحذير، شوف هل فعلاً فيه مشكلة؟
+لو لأ، عدل الكود علشان تسكت التحذير.
+
+10. **ضيف تعليق**:
+لو لقيت جزء في الكود مش مفهوم، اكتبه تعليق.
+أكيد في ناس غيرك هتتلخبط برضو.
+ابعت تعديل فيه التعليقات دي.
+
+## الشغل على التوثيق
+المستندات دايمًا بتتاخد بشكل بسيط.
+وساعات بتكون مكتوبة كأن اللي بيقراها أصلاً فاهم المشروع.
+لو حسيت إن التوثيق مش واضح، قول.
+اللي عنيهم جديدة بيشوفوا حاجات الناس اللي شغالة عليها مش شايفاها.
+
+11. **اعمل مثال**:
+مفيش مشروع عنده أمثلة كتير كفاية.
+لو فيه API، أو مكتبة، أو برنامج GUI زي Gimp، أو حتى أداة سطر أوامر – اعمل مثال عملي بيشرح ازاي تستخدمه.
+
+ممكن المثال يكون حاجة بسيطة من كود انت كتبته، أو حتى فيديو Screen Recording وانت بتستخدمه.
+الناس بتحب تشوف التطبيق العملي أكتر من الكلام.
+
+## اشتغل مع المجتمع
+الـ Open Source مش بس كود. المجتمع هو اللي بيخلي المشاريع دي تعيش وتكبر.
+فيه طرق كتير تقدر تساعد بيها في تقوية المجتمع حوالي المشروع.
+
+12. **جاوب على سؤال**:
+أحسن طريقة تساعد بيها المشروع والمجتمع هي إنك تساعد غيرك.
+لما حد جديد يسأل سؤال، وحضرتك تجاوبه بدل ما تقول له "روح اقرأ الـ Manual"، كده إنت مش بس ساعدته،
+إنت كمان شجّعته يكمل، ويمكن كمان يبقى عضو نشيط في المشروع بعد كده.
+
+كلنا بدأنا من الصفر، والمشاريع محتاجة دايمًا ناس جديدة تدخل علشان تفضل عايشة.
+
+13. **اكتب تدوينة (Blog Post)**:
+لو عندك مدونة، احكي فيها عن تجربتك مع المشروع اللي بتستخدمه.
+قول واجهت إيه مشاكل، وازاي حليتها.
+كده بتساعد المشروع بطريقتين:
+- إنك بتخلي الناس تفكر في المشروع وتسمع عنه.
+- وإنك بتسيب أثر للي بعدك لو حد واجه نفس المشكلة وعمل بحث على جوجل.
+
+(والتدوينة دي كمان ممكن تبقى وسيلة كويسة توري بيها خبرتك الحقيقة في الشغل لما تيجي تدور على شغل.)
+
+14. **طوّر موقع المشروع**:
+لو عندك خبرة في تصميم المواقع، وساعدت في تحسين الموقع أو شكله العام، ده وقتك مش بيضيع.
+يمكن المشروع محتاج لوجو، أو ستايل أحسن، أو تنظيم أحسن للمحتوى.
+الحاجات دي ساعات بتكون ناقصة عند المبرمجين، وساعتها أي حد عنده ذوق أو خبرة في التصميم بيفرق جامد.
+أنا عن نفسي بتمنى ألاقي حد يساعدني في التصميم في مشاريعي!
+
+15. **اكتب توثيق تقني (Documentation)**:
+لو تقدر تشرح ازاي برنامج أو أداة شغالة، يبقى تقدر تكتب توثيق تقني عنها.
+مشاريع Open Source كتير بتبقى محتاجة توثيق جديد، أو تطوير اللي موجود، أو تبسيطه للناس.
+
+كل ما كانت كتابتك أبسط وأوضح، كل ما كانت أحسن.
+وأجمل حاجة؟ مش لازم تكون مبرمج علشان تكتب Documentation.
+
+والأهم من كل ده، اسمع الناس بتتكلم عن إيه.
+حاول تلاحظ المشاكل اللي محتاجة حل.
+مثلاً، في مرة على Mailing List لمشروع Parrot، قرروا ينقلوا من Trac لـ GitHub في نظام التذاكر.
+ناس كتير كانوا ضد القرار علشان مفيش طريقة ينقلوا التذاكر القديمة.
+دخلت وقلت "طب ما أكتب أنا برنامج يحوّل التذاكر؟" والناس فرحت جدًا.
+فعلاً كتبت برنامج نقل أكتر من 450 تذكرة، واحتفظنا بتاريخهم.
+نجاح جميل، وساعدت الفريق، والمطورين ركزوا في شغلهم بدل وجع الدماغ.
+
+16. **علّم وساعد غيرك**:
+أحسن طريقة تتعلم بيها أكتر، إنك تشرح اللي فهمته لحد تاني.
+المدرّس الشاطر هو اللي يقدر يشرح حاجة معقدة بطريقة بسيطة.
+
+لو علمت حد، أو ساعدته، مش بس هتحس إنك عملت حاجة كويسة،
+ده كمان هيثبت المعلومة في دماغك، ويقوّي مهاراتك.
+ولما حد يساعدك، ما تحتفظش بالمعلومة لنفسك.
+شارك اللي عرفته، وخلّي الدنيا مكان أحسن.
+
+والسلام عليكم ورحمة الله وبركاته.
+
+
diff --git a/docs/additional-material/Things a non Programmer can do.id.md b/docs/additional-material/Things a non Programmer can do.id.md
new file mode 100644
index 00000000..1d91d6b5
--- /dev/null
+++ b/docs/additional-material/Things a non Programmer can do.id.md
@@ -0,0 +1,123 @@
+# Hal-hal yang dapat dilakukan oleh non Programmer
+## Mulai mendengarkan
+
+Semua yang ada di open source melibatkan orang lain.
+Anda ingin bergabung dengan sebuah tim, dan itu berarti memahami komunitas dan cara kerjanya.
+Datang ke sebuah proyek dan berkata “Hai, inilah yang saya pikir harus dilakukan oleh proyek ini” biasanya tidak dianggap sebagai hal yang baik.
+Beberapa proyek mungkin akan menerima pendekatan semacam itu, tetapi jika proyek tersebut sudah berjalan cukup lama, kemungkinan sikap tersebut akan kecil.
+**Mendengarkan adalah cara terbaik untuk mengetahui apa yang dibutuhkan oleh proyek.**.
+
+1. **Bergabunglah dengan milis**: Untuk banyak proyek, milis adalah saluran utama komunikasi tentang perkembangan proyek.
+Pada proyek-proyek besar, ada banyak milis yang dapat dipilih.
+Sebagai contoh, proyek PostgreSQL memiliki tidak kurang dari 12 milis berorientasi pengguna dan enam milis pengembang pada halaman milisnya.
+Saya sarankan Anda mengikuti milis berorientasi pengguna utama dan milis pengembang inti untuk mulai menyimak.
+
+2. **Mengikuti sebuah blog: Blog yang dikelola oleh pengembang inti sering kali memberikan informasi tentang apa yang akan hadir di rilis mendatang,
+dan apa yang diperlukan untuk mencapainya. Situs planet mengumpulkan berita dan entri blog dari banyak sumber yang terkait dengan proyek.
+Jika ada situs planet, seperti planet.gnome.org atau planet.mysql.com, mulailah dari sana. Cari saja di Google dengan kata kunci “planet
+
+ನಿಮ್ಮ ಎರಡು ರೆಪೊಸಿಟರಿಗಳನ್ನು ನನ್ನ ಸಾರ್ವಜನಿಕ ರೆಪೊಸಿಟರಿಯೊಂದಿಗೆ ನವೀಕರಿಸಲು, ಮೊದಲು ನೀವು ನನ್ನ ರೆಪೊಸಿಟರಿಯಿಂದ ನಿಮ್ಮ ಸ್ಥಳೀಯ ರೆಪೊಸಿಟರಿಗೆ `Fetch` ಮತ್ತು `Merge` ಮಾಡಬೇಕು.
+ಹಿಂದಿನ ಹಂತದ ನಂತರ, ನೀವು ನಿಮ್ಮ Fork ಗೆ ಸ್ಥಳೀಯ ಬದಲಾವಣೆಗಳನ್ನು `Push` ಮಾಡಬೇಕು. ನೀವು `Pull Request` ಅನ್ನು ಕೇವಲ ನಿಮ್ಮ Fork ನಿಂದ ಮಾತ್ರ ಮಾಡಬಹುದು, ಆದ್ದರಿಂದ Fork ನವೀಕರಿಸುವುದು ಅಂತಿಮ ಹಂತ.
+
+### ಈ ಹಂತಗಳನ್ನು ಅನುಸರಿಸಿ:
+
+#### 1. ನಿಮ್ಮ `master` ಶಾಖೆಯಲ್ಲಿ ಇರುವುದು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ
+
+ನೀವು ಯಾವ ಶಾಖೆಯಲ್ಲಿ ಇರುವಿರಿ ಎಂಬುದನ್ನು ಪರಿಶೀಲಿಸಲು:
+```bash
+git status
+```
+
+`master` ನಲ್ಲಿ ಇಲ್ಲದಿದ್ದರೆ, ಅದಕ್ಕೆ ಬದಲಾಯಿಸಿ:
+```bash
+git checkout master
+```
+
+#### 2. ನನ್ನ ರೆಪೊಸಿಟರಿಯನ್ನು `upstream` ಎಂದು ಸೇರಿಸಿ
+
+```bash
+git remote add upstream https://github.com/Roshanjossey/first-contributions
+```
+
+ಇದರಿಂದ Git ಗೆ ಈ URL ನಲ್ಲಿ ಇನ್ನೊಂದು ಆವೃತ್ತಿಯಿದೆ ಮತ್ತು ಅದನ್ನು `upstream` ಎಂದು ಕರೆಯುತ್ತೇವೆ ಎಂದು ತಿಳಿಯುತ್ತದೆ.
+
+#### 3. `upstream` ರೆಪೊಸಿಟರಿಯಿಂದ ಬದಲಾವಣೆಗಳನ್ನು ಪಡೆಯುವುದು
+
+```bash
+git fetch upstream
+```
+
+ಇದು `upstream` ರೆಪೊಸಿಟರಿಯ ಎಲ್ಲಾ ಬದಲಾವಣೆಗಳನ್ನು ಪಡೆಯುತ್ತದೆ.
+
+#### 4. ಬದಲಾವಣೆಗಳನ್ನು ನಿಮ್ಮ `master` ಶಾಖೆಯಲ್ಲಿ ಪರಿಷ್ಕರಿಸುವುದು
+
+```bash
+git rebase upstream/master
+```
+
+ಇದರಿಂದ ನೀವು `upstream` ನ ಬದಲಾವಣೆಗಳನ್ನು ನಿಮ್ಮ ಸ್ಥಳೀಯ `master` ಶಾಖೆಗೆ ಅನ್ವಯಿಸುತ್ತೀರಿ.
+
+#### 5. ಬದಲಾವಣೆಗಳನ್ನು ನಿಮ್ಮ GitHub Fork ಗೆ ಅಪ್ಲೋಡ್ ಮಾಡುವುದು
+
+```bash
+git push origin master
+```
+
+ಇದು ನಿಮ್ಮ Fork (`origin`) ನಲ್ಲಿ ನಿಮ್ಮ `master` ಶಾಖೆಯನ್ನು ನವೀಕರಿಸುತ್ತದೆ.
+
+ಈಗ, ನಿಮ್ಮ Fork ಮತ್ತು ಸ್ಥಳೀಯ ರೆಪೊಸಿಟರಿ ಅಪ್ಡೇಟ್ ಆಗಿದೆ! ನಿಮಗೆ ಶುಭವಾಗಲಿ!
+
+ಪ್ರತಿಯೊಮ್ಮೆ ನಿಮ್ಮ GitHub Fork `commits behind` ಎಂಬ ಸಂದೇಶ ತೋರಿಸಿದಾಗ ಈ ಹಂತಗಳನ್ನು ಅನುಸರಿಸಿ.
+
diff --git a/docs/additional-material/translations/Kannada/moving-a-commit-to-a-different-branch.ka.md b/docs/additional-material/translations/Kannada/moving-a-commit-to-a-different-branch.ka.md
new file mode 100644
index 00000000..79f0e953
--- /dev/null
+++ b/docs/additional-material/translations/Kannada/moving-a-commit-to-a-different-branch.ka.md
@@ -0,0 +1,31 @@
+# commit ಅನ್ನು ಬೇರೆ branch ಗೆ ಸ್ಥಳಾಂತರಿಸುವುದು
+
+ನೀವು commit ಮಾಡಿದ್ದ ನಂತರ, ಅದು ತಪ್ಪಾಗಿ ಬೇರೆ branch ನಲ್ಲಿ ಆಗಿದೆ ಎಂದು ಗಮನಿಸಿದರೆ ಏನು ಮಾಡಬೇಕು?
+ಈ ಟ್ಯುಟೋರಿಯಲ್ ಇದನ್ನು ಸರಿಪಡಿಸುವ ಬಗ್ಗೆ.
+
+## ಈಗಾಗಲೇ ಅಸ್ತಿತ್ವದಲ್ಲಿರುವ branch ಗೆ commit ಸ್ಥಳಾಂತರಿಸುವುದು
+
+ಈ ಕೆಳಗಿನ ಆಜ್ಞೆಗಳನ್ನು ಬಳಸಿ:
+
+```bash
+git reset HEAD~ --soft # ಕೊನೆಯ commit ಅನ್ನು ಹಿಂದಕ್ಕೆ ಕೊಂಡು ಬರುತ್ತದೆ, ಆದರೆ ಪರಿಷ್ಕರಣೆಗಳನ್ನು ಉಳಿಸುತ್ತದೆ.
+git stash # ಪ್ರಸ್ತುತ ಸ್ಥಿತಿಯನ್ನು ಸಂಗ್ರಹಿಸುತ್ತದೆ.
+
+git checkout name-of-the-correct-branch # ಸರಿಯಾದ branch ಗೆ ತೆರಳುತ್ತದೆ.
+git stash pop # ಹಿಂದಿನ ಸ್ಥಿತಿಯನ್ನು ಪುನಃ ಪ್ರಸ್ತಾಪಿಸುತ್ತದೆ.
+git add . # ಎಲ್ಲಾ ಪರಿಷ್ಕರಣೆಗಳನ್ನು stage ಮಾಡುತ್ತದೆ.
+git commit -m "your message here" # commit ಮಾಡುತ್ತದೆ.
+```
+
+ಈಗ ನಿಮ್ಮ ಪರಿಷ್ಕರಣೆಗಳು ಸರಿಯಾದ branch ನಲ್ಲಿ ಇವೆ.
+
+## ಹೊಸ branch ಗೆ commit ಸ್ಥಳಾಂತರಿಸುವುದು
+
+```bash
+git branch newbranch # ಹೊಸ branch ರಚಿಸುತ್ತದೆ.
+git reset --hard HEAD~# # # ಗಿಂತ ಹಳೆಯ commit ಗಳನ್ನು ಹಿಂದಕ್ಕೆ ತೆಗೆದುಕೊಳ್ಳುತ್ತದೆ (ಈಗಿನ branch ನಿಂದ ಅಳಿಸಿಬಿಡುತ್ತದೆ!).
+git checkout newbranch # ಹೊಸ branch ಗೆ ಸ್ಥಳಾಂತರವಾಗುತ್ತದೆ.
+```
+
+**ಗಮನಿಸಿ:** ಯಾವುದೇ commit ಆಗದ ಪರಿಷ್ಕರಣೆಗಳು ಇಲ್ಲವಾಗುತ್ತವೆ!
+
diff --git a/docs/additional-material/translations/Kannada/removing-a-file.ka.md b/docs/additional-material/translations/Kannada/removing-a-file.ka.md
new file mode 100644
index 00000000..2f73e7fd
--- /dev/null
+++ b/docs/additional-material/translations/Kannada/removing-a-file.ka.md
@@ -0,0 +1,63 @@
+# commit ಅನ್ನು ಬೇರೆ branch ಗೆ ಸ್ಥಳಾಂತರಿಸುವುದು
+
+ನೀವು commit ಮಾಡಿದ್ದ ನಂತರ, ಅದು ತಪ್ಪಾಗಿ ಬೇರೆ branch ನಲ್ಲಿ ಆಗಿದೆ ಎಂದು ಗಮನಿಸಿದರೆ ಏನು ಮಾಡಬೇಕು?
+ಈ ಟ್ಯುಟೋರಿಯಲ್ ಇದನ್ನು ಸರಿಪಡಿಸುವ ಬಗ್ಗೆ.
+
+## ಈಗಾಗಲೇ ಅಸ್ತಿತ್ವದಲ್ಲಿರುವ branch ಗೆ commit ಸ್ಥಳಾಂತರಿಸುವುದು
+
+ಈ ಕೆಳಗಿನ ಆಜ್ಞೆಗಳನ್ನು ಬಳಸಿ:
+
+```bash
+git reset HEAD~ --soft # ಕೊನೆಯ commit ಅನ್ನು ಹಿಂದಕ್ಕೆ ಕೊಂಡು ಬರುತ್ತದೆ, ಆದರೆ ಪರಿಷ್ಕರಣೆಗಳನ್ನು ಉಳಿಸುತ್ತದೆ.
+git stash # ಪ್ರಸ್ತುತ ಸ್ಥಿತಿಯನ್ನು ಸಂಗ್ರಹಿಸುತ್ತದೆ.
+
+git checkout name-of-the-correct-branch # ಸರಿಯಾದ branch ಗೆ ತೆರಳುತ್ತದೆ.
+git stash pop # ಹಿಂದಿನ ಸ್ಥಿತಿಯನ್ನು ಪುನಃ ಪ್ರಸ್ತಾಪಿಸುತ್ತದೆ.
+git add . # ಎಲ್ಲಾ ಪರಿಷ್ಕರಣೆಗಳನ್ನು stage ಮಾಡುತ್ತದೆ.
+git commit -m "your message here" # commit ಮಾಡುತ್ತದೆ.
+```
+
+ಈಗ ನಿಮ್ಮ ಪರಿಷ್ಕರಣೆಗಳು ಸರಿಯಾದ branch ನಲ್ಲಿ ಇವೆ.
+
+## ಹೊಸ branch ಗೆ commit ಸ್ಥಳಾಂತರಿಸುವುದು
+
+```bash
+git branch newbranch # ಹೊಸ branch ರಚಿಸುತ್ತದೆ.
+git reset --hard HEAD~# # # ಗಿಂತ ಹಳೆಯ commit ಗಳನ್ನು ಹಿಂದಕ್ಕೆ ತೆಗೆದುಕೊಳ್ಳುತ್ತದೆ (ಈಗಿನ branch ನಿಂದ ಅಳಿಸಿಬಿಡುತ್ತದೆ!).
+git checkout newbranch # ಹೊಸ branch ಗೆ ಸ್ಥಳಾಂತರವಾಗುತ್ತದೆ.
+```
+
+**ಗಮನಿಸಿ:** ಯಾವುದೇ commit ಆಗದ ಪರಿಷ್ಕರಣೆಗಳು ಇಲ್ಲವಾಗುತ್ತವೆ!
+
+---
+
+# Git ನಿಂದ ಫೈಲ್ ಅನ್ನು ತೆಗೆದುಹಾಕುವುದು
+
+ಕಾಲಕಾಲಕ್ಕೆ, Git ನಿಂದ ಫೈಲ್ ಅನ್ನು ತೆಗೆದುಹಾಕಬೇಕು, ಆದರೆ ಅದನ್ನು ನಿಮ್ಮ ಕಂಪ್ಯೂಟರ್ ನಿಂದ ಅಳಿಸಬಾರದು. ಇದನ್ನು ಈ ಕೆಳಗಿನ ಆಜ್ಞೆಯ ಮೂಲಕ ಮಾಡಬಹುದು:
+
+```bash
+git rm
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
-[](https://opensource.org/licenses/MIT)
-[](https://www.codetriage.com/roshanjossey/first-contributions)
-
-# First Contributions
-
-|
-
-## Fork this repository
-
-Fork this repo by clicking on the fork button on the top right of this page.
-This will create a copy of this repository in your account.
-
-## Clone the repository
-
-Now clone this repo to your machine.
-
-IMPORTANT: DO NOT CLONE THE ORIGINAL REPO. Go to your fork and clone it.
-
-To clone the repo, click on "Code" and then copy the string down below.
-
-
-
-Open the git bash application you just downloaded. It should look like the image down below if it's on a windows machine.
-
-
-
-Go to the folder that you want to save this project on by using this command
-
-```bash
-cd
-
-Use the string you copied in the step above to clone the repository using this command
-
-```bash
-git clone
-
-Go to the directory where the repo is and open it up on vs code to make your changes.
-
-
-
-## Create a branch
-
-Now create a branch by using this simple command. This command not only creates a branch for you but also lets you switch to that branch.
-
-```bash
-git checkout -b
-
-## Make necessary changes and commit those changes
-
-Now open `Contributors.md` file in a text editor, scroll to the bottom of the page and add your name to it, then save the file.
-
-Example: If your name is James Smith, It should look like this.
-
-\[James Smith](https://github.com/jamessmith)
-
-You can see that there are changes to Contributors.md by simply running this command
-
-```bash
-git status
-```
-
-
-
-Now commit those changes:
-
-First add the change you made to the staging area by using
-
-```bash
-git add file-name
-```
-
-Then write a commit message by sing this command
-
-```bash
-git commit -m "Add your-name to Contributors list"
-```
-
-Replace `
-
-To see if your commit has been made you can run a simple `git log --oneline` command.
-
-## Push changes to github
-
-Once you are done with the above steps you can push your changes by using this command
-
-```bash
-git push origin
-
-## Submit your changes for review
-
-If you go to your repository on github, you'll see `Compare & pull request` button. click on that button.
-
-
-
-Now submit the pull request.
-
-
-
-Soon I'll be merging all your changes into the master branch of this project. You will get a notification email once the changes have been merged.
-
-## Where to go from here?
-
-Congrats! You just completed the standard _fork -> clone -> edit -> PR_ workflow that you'll encounter often as a contributor!
-
-Celebrate your contribution and share it with your friends and followers by going to [web app](https://firstcontributions.github.io#social-share).
-
-You can join our slack team in case you need any help or have any questions. [Join slack team](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
-
-### [Additional material](../additional-material/git_workflow_scenarios/additional-material.md)
-
-## Tutorials Using Other Tools
-
-[Back to main page](https://github.com/firstcontributions/first-contributions#tutorials-using-other-tools)
diff --git a/docs/cli-tool-tutorials/git-cli-tutorial-PL.md b/docs/cli-tool-tutorials/git-cli-tutorial-PL.md
new file mode 100644
index 00000000..c6b0f835
--- /dev/null
+++ b/docs/cli-tool-tutorials/git-cli-tutorial-PL.md
@@ -0,0 +1,124 @@
+[](https://github.com/ellerbrock/open-source-badges/)
+[
](https://join.slack.com/t/firstcontributors/shared_invite/enQtNjkxNzQwNzA2MTMwLTVhMWJjNjg2ODRlNWZhNjIzYjgwNDIyZWYwZjhjYTQ4OTBjMWM0MmFhZDUxNzBiYzczMGNiYzcxNjkzZDZlMDM)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# First Contributions
+
+|
+
+Dodaj te zmiany do właśnie utworzonej gałęzi za pomocą polecenia `git add`:
+`git add Contributors.md`
+
+Teraz zatwierdź te zmiany za pomocą polecenia `git commit`:
+`git commit -m "Add your-name to Contributors list"`
+zastępując `your-name` swoim imieniem.
+
+-----
+
+# Push changes to github
+
+Wypchnij swoje zmiany za pomocą polecenia `git push`:
+
+```
+git push origin -u your-branch-name
+```
+
+zastępując `your-branch-name` nazwą gałęzi, którą utworzyłeś wcześniej.
+
+\remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead. + remote: Please see [https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/](https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/) for more information. + fatal: Authentication failed for '[https://github.com/](https://github.com/)\+ Przejdź do [tutoriala GitHub](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account) dotyczącego generowania i konfigurowania klucza SSH na swoim koncie. + +\/first-contributions.git/'\
](https://join.slack.com/t/firstcontributors/shared_invite/enQtNjkxNzQwNzA2MTMwLTVhMWJjNjg2ODRlNWZhNjIzYjgwNDIyZWYwZjhjYTQ4OTBjMWM0MmFhZDUxNzBiYzczMGNiYzcxNjkzZDZlMDM)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# પ્રથમ ફાળો
+
+|
+
+આ ફેરફારોને નીચેના આદેશથી ઉમેરી દો:
+
+```bash
+git add Contributors.md
+```
+
+હવે તમારાં ફેરફારોને કમિટ કરો:
+
+```bash
+git commit -m "Add your-name to Contributors list"
+```
+
+`your-name` ને તમારા નામથી બદલો.
+
+# ફેરફારો GitHub પર અપલોડ કરો
+
+```bash
+git push origin -u your-branch-name
+```
+
+`your-branch-name` ને તમે અગાઉ બનાવેલી શાખાના નામથી બદલો.
+
+remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead. + remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information. + fatal: Authentication failed for 'https://github.com/+ તમારા GitHub એકાઉન્ટમાં SSH કી કેવી રીતે ઉમેરવી તે જાણવા માટે [GitHub ની ટ્યુટોરિયલ](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account) જુઓ. + +/first-contributions.git/'
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# ആദ്യ സംഭാവനകൾ
+
+\|
+
+## ഈ റീപോസിറ്ററി Fork ചെയ്യുക
+
+ഈ പേജിന്റെ മുകളിലെ വലത് വശത്ത് കാണുന്ന **Fork** ബട്ടൺ അമർത്തി ഈ റീപോയെ Fork ചെയ്യുക.
+ഇത് നിങ്ങളുടെ GitHub അക്കൗണ്ടിൽ ഒരു പകർപ്പ് സൃഷ്ടിക്കും.
+
+## റീപോസിറ്ററി Clone ചെയ്യുക
+
+ഇപ്പോൾ നിങ്ങളുടെ **Fork ചെയ്ത റീപോ** നിങ്ങളുടെ കമ്പ്യൂട്ടറിലേക്ക് Clone ചെയ്യുക.
+
+ പ്രധാനമാണ്: **ഒറിജിനൽ റീപോ** Clone ചെയ്യരുത്. നിങ്ങളുടെ Fork ചെയ്തത് മാത്രം Clone ചെയ്യുക.
+
+Clone ചെയ്യാൻ “Code” അമർത്തി, താഴെ കാണുന്ന URL copy ചെയ്യുക.
+
+```bash
+git clone
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# Primeras Contribuciones
+
+|
+
+## Haz un fork de este repositorio
+
+Haz clic en el botón "Fork" en la esquina superior derecha de esta página para crear una copia de este repositorio en tu cuenta.
+
+## Clona tu repositorio
+
+Ahora clona ese repositorio en tu computadora.
+
+⚠️ IMPORTANTE: NO clones el repositorio original.
+
+Ve a tu fork y clónalo.
+
+Para hacerlo, haz clic en "Code" y copia el enlace.
+
+
+
+Abre la aplicación Git Bash que acabas de instalar. Debería lucir como la siguiente imagen si estás en Windows:
+
+
+
+Ve a la carpeta donde quieres guardar este proyecto usando el comando:
+
+`cd
+
+Usa el enlace copiado anteriormente para clonar tu repositorio:
+
+`git clone
+
+Ve al directorio recién clonado y ábrelo en Visual Studio Code para hacer tus cambios.
+
+
+
+## Crear una rama
+
+Ahora crea una nueva rama usando este comando:
+
+```
+git checkout -b
+
+## Realiza los cambios necesarios
+
+Abre el archivo `Contributors.md` en tu editor, ve al final del archivo y agrega tu nombre.
+
+Ejemplo:
+```md
+[James Smith](https://github.com/jamessmith)
+```
+
+Para verificar los cambios:
+
+```bash
+git status
+```
+
+
+
+Ahora haz commit de los cambios:
+
+Primero agrega el archivo:
+
+```bash
+git add Contributors.md
+```
+
+Después crea el commit:
+
+```bash
+git commit -m "Agrego mi nombre a la lista de contribuidores"
+```
+
+
+
+Para verificar el commit:
+
+```bash
+git log --oneline
+```
+
+## Sube tus cambios a GitHub
+
+```bash
+git push origin
+
+## Envía tu Pull Request
+
+Ve a tu repositorio en GitHub. Verás un botón que dice “Compare & pull request”. Haz clic allí.
+
+
+
+Completa el formulario y envía el Pull Request.
+
+
+
+Pronto tus cambios serán revisados e integrados al repositorio principal. Recibirás una notificación por correo.
+
+## ¿Y ahora qué?
+
+¡Felicidades! Has completado el flujo de trabajo clásico _fork → clone → editar → pull request_ que es común en el mundo del open source.
+
+Celebra tu contribución compartiéndola con tus amigos o en redes. También puedes unirte al equipo en Slack para resolver dudas:
+👉 [Únete al Slack](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+
+### [Material adicional](../additional-material/git_workflow_scenarios/additional-material.md)
+
+## Guías para otras herramientas
+
+[Volver a la página principal](https://github.com/firstcontributions/first-contributions/blob/main/translations/README.es.md#material-de-apoyo-para-otras-herramientas)
diff --git a/docs/gui-tool-tutorials/github-windows-intellij-tutorial.zh-cn.md b/docs/gui-tool-tutorials/github-windows-intellij-tutorial.zh-cn.md
new file mode 100644
index 00000000..4a5c5e8a
--- /dev/null
+++ b/docs/gui-tool-tutorials/github-windows-intellij-tutorial.zh-cn.md
@@ -0,0 +1,126 @@
+[](https://github.com/ellerbrock/open-source-badges/)
+[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# First Contributions(第一次贡献)
+
+|
+
+点击页面右上角的 Fork 按钮 Fork 此仓库。这将在你的 GitHub 账户中创建一个此项目的副本。
+
+GitHub 会记录你 Fork 的仓库与原始仓库之间的关系。你可以把你的副本看作是一个工作副本。
+
+大多数顶层 GitHub 仓库(即不是 Fork 而来的)只有一小部分核心团队成员可以直接提交更改。其他所有贡献者必须 Fork 该仓库,修改后提交 Pull Request 请求将更改合并回主仓库。一旦主仓库管理员批准这些更改,它们将被合并,而你将瞬间收获名誉与财富!稍后我们会介绍如何创建 Pull Request。
+
+---
+
+## 克隆你的仓库
+
+
+
+下一步是将你的仓库克隆到本地,这样你就可以开始修改内容了。IntelliJ IDEA 需要你的仓库 URL,因此点击仓库页面上的 "Code" 按钮,然后点击“复制”图标。
+
+**注意:** 新手经常犯的一个错误是克隆了原始仓库而不是自己的 Fork 仓库。请确认你复制的是你自己的仓库地址。
+
+现在打开 IntelliJ IDEA。
+
+IntelliJ IDEA 允许你检出(Git 中的 clone)一个已有的仓库,并基于下载的内容创建新项目。
+
+在主菜单中选择 `VCS | Get from Version Control`,或者在没有打开项目时点击欢迎界面中的 `Get from Version Control`。
+
+在打开的对话框中,粘贴你仓库的远程地址(你也可以点击 “Test” 测试连接),或从左侧选择一个 VCS 托管服务。如果你已登录某个服务,它会自动列出你可克隆的仓库。
+
+点击 “Clone”。如果你想基于克隆的源代码创建 IntelliJ 项目,在确认对话框中点击 “Yes”。Git 根目录将自动设置为项目根目录。
+
+如果项目包含子模块,它们也会被克隆并注册为项目根。
+
+**重要提示:** 确保克隆的是你自己的 Fork 仓库,而不是原始仓库,否则不会生效。
+
+---
+
+## 创建分支
+
+在 Git 中,分支是一种强大的机制,允许你从主开发线中分离出来,比如开发一个新功能或为发布冻结某个版本等。
+
+在 IntelliJ IDEA 中,所有与分支相关的操作都可以在 Git 分支弹出窗口中完成。点击状态栏中的 Git 小部件,或按 `Ctrl+Shift+\`` 唤出它。
+
+当前检出的分支名称会显示在状态栏的 Git 小部件中。
+
+在弹出窗口中选择 `New Branch`。
+
+在弹出对话框中输入分支名称,确保勾选 “Checkout branch” 选项,这样你会自动切换到新建分支。
+
+新分支会从当前的 HEAD 开始。如果你想从某个旧提交创建分支,可以在 `Version Control` 工具窗口的 `Log` 选项卡(快捷键 Alt+9)中选择一个提交,然后右键选择 `New Branch`。
+
+---
+
+## 进行必要的修改
+
+打开 `Contributors.md` 文件,在文件中的任意位置添加你的名字。该文件使用的是 GitHub Flavored Markdown (GFM) 语法,是 Markdown 的一种扩展格式。
+
+你可以复制其他贡献者的格式,并修改成你的名字,以确保语法正确 —— 有时语法会比较严格。
+
+---
+
+## 提交并推送更改到 GitHub
+
+在 `Version Control` 工具窗口的 `Local Changes` 选项卡中,选择你要提交的文件或整个更改列表,按下 `Ctrl+K` 或点击工具栏上的 `Commit` 按钮。
+
+在弹出的提交对话框中,会列出你自上次提交以来的所有更改文件及新增文件。
+
+输入有意义的提交信息。
+
+你可以按 `Ctrl+M` 打开提交历史,从中选择最近用过的提交信息。
+
+你也可以在推送前随时修改提交信息。
+
+按 `Ctrl+Shift+K` 或从主菜单选择 `VCS | Git | Push`。弹出的 `Push Commits` 窗口会列出当前分支所有未推送的提交。
+
+---
+
+## 提交 Pull Request 请求代码审查
+
+此时你已完成了修改,但这些更改仍然只存在于你自己的仓库中。接下来我们将向原始仓库提交合并请求。
+
+在你的 GitHub 仓库页面上,你会看到一个 “Compare & pull request” 的按钮。点击它。
+
+
+
+接下来提交你的 Pull Request。
+
+
+
+不久之后,你的更改就会被合并到主仓库的 master 分支中。一旦合并成功,你会收到邮件通知。
+
+---
+
+## 接下来可以做什么?
+
+恭喜!你刚刚完成了标准的 _fork -> clone -> 编辑 -> PR_ 流程,这将是你未来开源贡献中非常常见的工作流程!
+
+庆祝一下你的首次贡献,并通过 [web app](https://firstcontributions.github.io#social-share) 与好友分享你的成就吧!
+
+如果你有任何问题,欢迎加入我们的 Slack 团队:[加入 Slack 团队](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+
+---
+
+### [附加资料](../additional-material/git_workflow_scenarios/additional-material.md)
+
+## 使用其他工具的教程
+[返回主页](https://github.com/firstcontributions/first-contributions#tutorials-using-other-tools)
diff --git a/docs/gui-tool-tutorials/translations/German/github-windows-vs-code-tutorial.de.md b/docs/gui-tool-tutorials/translations/German/github-windows-vs-code-tutorial.de.md
new file mode 100644
index 00000000..21d02d0d
--- /dev/null
+++ b/docs/gui-tool-tutorials/translations/German/github-windows-vs-code-tutorial.de.md
@@ -0,0 +1,119 @@
+[](https://github.com/ellerbrock/open-source-badges/)
+[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# Erste Beiträge
+
+|
+
+Forke dieses Repository, indem Du oben rechts auf dieser Seite auf die Schaltfläche „Fork“ klickst. Dadurch wird eine Kopie dieses Repositorys in Ihrem GitHub-Konto erstellt.
+
+GitHub verfolgt die Beziehung zwischen Ihrem Repository und dem Repository, von dem Sie es geforkt haben. Sie können sich Ihr Repository als Arbeitskopie vorstellen.
+
+Die meisten Top-Level-Repositorys auf GitHub (d. h. solche, die nicht von einem anderen Repository geforkt wurden) haben ein kleines Kernteam von Personen, welche Änderungen direkt committen können. Alle anderen Mitwirkenden müssen das Repo forken und Änderungen im Fork vornehmen, dann einen Pull Request erstellen, um zu beantragen, dass ihre Änderungen wieder in das Top-Level-Repo übernommen werden. Wenn dem Administrator des Top-Level-Repos die Änderungen gefallen, werden sie übernommen und Du wirst sofort berühmt und reich! Mehr dazu später.
+
+## Das Repository klonen
+
+
+
+Der nächste Schritt besteht darin, Dein Repository auf Deinen Computer zu klonen, damit Du Änderungen vornehmen kannst. VS Code benötigt die URL Deines Repositories, also klicke auf die Schaltfläche „Code“ und dann auf das Symbol „In die Zwischenablage kopieren“.
+
+**ACHTUNG:** Ein Fehler, den neue Mitwirkende oft machen, ist, dass sie das Repository, von dem sie geforkt haben klonen an Stelle ihres eigenen. Überprüfe die Adressleiste Deines Browsers und stelle sicher, dass Du Dein Repository klonst.
+
+Öffne nun Visual Studio Code. Die Willkommensseite von VS Code wird angezeigt. Drücke `F1`, um die Leiste zu öffnen, die unten gezeigt wird. Beachte, dass bereits ein `>` (größer als) Zeichen im Textfeld steht. Du kannst auch über `CTRL-P` zum Eingabeaufforderung gelangen und das `>`-Zeichen eingeben.
+
+
+
+Vielleicht bemerkst Du, dass bereits einige obskure Befehle aufgelistet sind. Das sind meine zuletzt verwendeten Befehle. Also kümmere Dich nicht darum.
+
+
+
+Nun tippe `git clone`, nur `git` oder `clone` (es funktioniert wie eine Suche).
+Wähle den Eintrag `Git: Clone` aus und drücke `Enter`.
+
+
+
+Füge die URL Deines Repositories ein und drücke `Enter`. Dadurch wird der Datei-Explorer geöffnet, in dem Du auswählen kannst, wo das Git-Repository gespeichert werden soll.
+
+**Wichtig**: Achte darauf, dass es sich um das geforkte Repository handelt und nicht um das Original, da es sonst nicht funktioniert.
+
+
+
+Du solltest eine Statusmeldung in der unteren rechten Ecke von Visual Studio Code sehen. Nachdem der Vorgang abgeschlossen ist, kannst Du das geklonte Repository (jetzt ein Ordner auf Deinem Computer) mit den Schaltflächen im Dialogfeld öffnen.
+
+## Erstelle einen Branch
+
+Öffne die Befehls-Palette erneut, indem Du `F1` drückst. Tippe `branch` ein und wähle den Befehl `create branch` aus. Im nächsten Schritt gib den Namen Deines neuen Branches ein, zum Beispiel `add-david-kroell`. Drücke `Enter`, um den Branch zu erstellen. Der Branch ist auch bereits ausgecheckt. [Was bedeutet checkout?](https://www.git-scm.com/docs/git-checkout)
+
+
+
+## Nötige Änderungen vornehmen
+
+Öffne `Contributors.md` in einem Texteditor und füge Deinen Namen hinzu. Achte darauf, dass Du den Namen nicht am Anfang oder am Ende der Datei hinzufügst. Speichere die Datei anschließend.
+Diese Datei enthält GFM (GitHub Flavored Markdown), eine proprietäre Variante der Markdown-Syntax.
+
+Kopiere eine der anderen Mitwirkenden-Zeilen und passe sie mit Deinem Namen an, um sicherzustellen, dass die Syntax korrekt ist - sie kann schwierig sein. Speichere die Datei, um die Änderung zu registrieren.
+
+
+
+## Änderungen committen und zu GitHub pushen
+
+Auf der linken Seite von VS Code befindet sich ein Menü mit 5 Symbolen. Wähle das Versionskontroll-/Quellcodeverwaltungssymbol aus.
+(Shortcut: `Ctrl + Shift + G`)
+
+
+
+Der Datei-Explorer zeigt alle Dateien an, die seit dem letzten Commit geändert wurden. Wenn Du mit der Maus über die Dateien fährst und auf das `+` (Plus) klickst, werden die Dateien zum Staging hinzugefügt.
+
+
+
+Tippe etwas in die Zeile oben im Explorer und drücke das Häkchen. Die Änderungen sind jetzt in Deiner lokalen Kopie committed. Jetzt müssen die Änderungen zurück zu GitHub gepusht werden.
+
+
+
+Klicke auf das Drei-Punkte-Symbol, um das Menü zu öffnen, in dem Du die Option `Publish Branch` auswählst. Dadurch sollte ein Dialogfeld geöffnet werden, in dem Du Deine GitHub-Anmeldeinformationen eingeben kannst.
+
+
+
+## Änderungen zur Überprüfung absenden
+
+An diesem Punkt hast Du Deine Änderung abgeschlossen, aber sie befindet sich noch nur in Deinem Repository. Dieser Schritt zeigt Dir, wie Du eine Anfrage an den Administrator des Top-Level-Repos stellen kannst, um Deine Änderung zusammenzuführen.
+
+In Deinem Repository auf GitHub siehst Du neben der Benachrichtigung über den neuen Branch die Schaltfläche `Compare & pull request`. Klicke auf diese Schaltfläche.
+
+
+
+Sende jetzt den Pull Request ab.
+
+
+
+Ich werde nun Deine Änderungen in den Master-Branch dieses Projekts mergen. Du erhältst eine E-Mail, sobald dies geschehen ist.
+
+## Und jetzt?
+
+Herzlichen Glückwunsch! Du hast gerade den Standard-Workflow _fork -> clone -> edit -> PR_ abgeschlossen, den Du als Contributor häufig antreffen wirst!
+
+Feiere Deinen Beitrag zum Projekt und teile ihn mit Deinen Freunden und Followern über unsere [Web-App](https://firstcontributions.github.io#social-share).
+
+Du kannst dem Slack-Team beitreten, falls Du Hilfe benötigst oder Fragen hast. [Slack-Team beitreten](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
+
+
+### [Weiterführende Materialien](../additional-material/git_workflow_scenarios/additional-material.md)
+
+## Tutorials mit anderen Tools
+[Zurück zur Hauptseite](https://github.com/firstcontributions/first-contributions#tutorials-using-other-tools)
diff --git a/docs/gui-tool-tutorials/translations/Urdu/github-desktop-urdu.md b/docs/gui-tool-tutorials/translations/Urdu/github-desktop-urdu.md
new file mode 100644
index 00000000..575efa05
--- /dev/null
+++ b/docs/gui-tool-tutorials/translations/Urdu/github-desktop-urdu.md
@@ -0,0 +1,95 @@
+ٹھیک ہے 👍 آپ نے جو متن دیا ہے وہ **First Contributions** گائیڈ ہے (GitKraken ایڈیٹر کے ساتھ)۔ میں اس کو اُردو میں ترجمہ کر رہا ہوں تاکہ آسانی سے سمجھ سکیں۔
+
+---
+
+# پہلی شراکتیں (First Contributions)
+
+|
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -114,7 +114,7 @@ Urime! Ti sapo ke kompletuar procesin _fork -> clone -> edit -> PR_ që do ta ha
Festoje kontributin tënd dhe ndaje me shokët dhe ndjekësit duke shkuar te [web aplikacioni](https://firstcontributions.github.io/#social-share).
-Ti mund të bashkohesh në ekipin tonë në slack nëse të duhet ndihmë ose nëse ke ndonjë pyetje. [Bashkohu ekipit në slack](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
+Nëse dëshiron më shumë praktikë, shiko [kontributet e kodit](https://github.com/roshanjossey/code-contributions)
Tani të të ndihmojmë që të kontribuosh në projekte tjera. Ne kemi krijuar një listë projektesh me probleme të lehta tek të cilat mund të fillosh. Shiko [listën e projekteve në web apliacion](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.arm.md b/docs/translations/README.arm.md
index 72c37831..79658426 100644
--- a/docs/translations/README.arm.md
+++ b/docs/translations/README.arm.md
@@ -1,5 +1,5 @@
[](https://github.com/firstcontributions/open-source-badges)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1n4y7xnk0-DnLVTaN6U9xLU79H5Hi62w)
+
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -118,11 +118,13 @@ git push -u origin your-branch-name
## Որտեղ գնալ այստեղից?
+
Շնորհավորում եմ Դուք հենց նոր ավարտեցիք ստանդարտ _fork -> clone -> edit -> pull request_ աշխատանքային հոսքը, որը հաճախ կհանդիպեք որպես ներդրող!
Նշեք ձեր ներդրումը և կիսվեք այն ձեր ընկերների և հետևորդների հետ՝ գնալով [վեբ հավելված](https://firstcontributions.github.io/#social-share).
-Դուք կարող եք միանալ մեր Slack թիմին, եթե օգնության կարիք ունեք կամ հարցեր ունեք. [Միացե՛ք Slack թիմին](https://join.slack.com/t/firstcontributors/shared_invite/zt-1n4y7xnk0-DnLVTaN6U9xLU79H5Hi62w).
+Եթե ցանկանում եք ավելի շատ փորձ ձեռք բերել, տեսեք [ծածկագրի ներդրումները](https://github.com/roshanjossey/code-contributions)։
+
Հիմա եկեք սկսենք ձեր ներդրումն ունենալ այլ նախագծերում: Մենք կազմել ենք հեշտ խնդիրներ ունեցող նախագծերի ցանկ, որոնցից կարող եք սկսել: Ստուգեք [վեբ հավելվածի նախագծերի ցանկը](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.assamese.md b/docs/translations/README.assamese.md
index f1c6f8e2..946caa62 100644
--- a/docs/translations/README.assamese.md
+++ b/docs/translations/README.assamese.md
@@ -144,10 +144,11 @@ Pull Request জমা দিয়ক
আপোনাৰ অৱদান উদযাপন কৰক আৰু আপোনাৰ বন্ধু আৰু অনুসাৰকসকলৰ সৈতে ইয়াক শেয়াৰ কৰক [web app](https://firstcontributions.github.io/#social-share).
-আপুনি আমাৰ Slack দলত যোগদান কৰিব পাৰে যদি আপোনাৰ সহায়ৰ প্ৰয়োজন হয় বা কোনো প্ৰশ্ন থাকে। [Join slack team](https://join.slack.com/t/firstcontributors/shared_invite/zt-2vqegkew0-ZuzGM1LO33C6Ts4nZyat1Q).
+যদি আপুনি অধিক অনুশীলন কৰিব বিচাৰে, [code contributions](https://github.com/roshanjossey/code-contributions) পৰীক্ষা কৰক।
এতিয়া আপোনাক আন প্ৰকল্পত অৱদান কৰিবলৈ আৰম্ভ কৰা যাক। আমি সহজ সমস্যাসমূহ সহ কিছু প্ৰকল্পৰ তালিকা সংকলন কৰিছো যাৰ সহায়ত আপুনি আৰম্ভ কৰিব পাৰে। [ৱেব এপত প্ৰকল্পসমূহৰ তালিকা পৰীক্ষা কৰক](https://firstcontributions.github.io/#project-list).
+
### [অতিৰিক্ত সামগ্ৰী](additional-material/git_workflow_scenarios/additional-material.md)
## অন্য সঁজুলিসমূহ ব্যৱহাৰ কৰি টিউট'ৰিয়েলসকল
diff --git a/docs/translations/README.aze.md b/docs/translations/README.aze.md
index 971e7432..8b5dab09 100644
--- a/docs/translations/README.aze.md
+++ b/docs/translations/README.aze.md
@@ -1,5 +1,4 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -103,7 +102,7 @@ Təbriklər! Töhfə olaraq tez-tez qarşılaşacağınız standart _fork -> clo
Töhfənizi qeyd edin və [veb tətbiqə](https://firstcontributions.github.io/#social-share) girərək dostlarınız və izləyicilərinizlə bölüşün.
-Hər hansı bir köməyə ehtiyacınız və ya suallarınız olarsa, [Slack](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA) komandamıza qoşula bilərsiniz.
+Daha çox təcrübə istəyirsinizsə, yoxlayın [kod töhfələri](https://github.com/roshanjossey/code-contributions).
İndi başqa layihələrə töhfə verməyə başlayaq. Başlaya biləcəyiniz asan məsələləri olan layihələrin siyahısını hazırladıq, [siyahıya baxın](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.bg.md b/docs/translations/README.bg.md
index 37466f24..8ee8bc65 100644
--- a/docs/translations/README.bg.md
+++ b/docs/translations/README.bg.md
@@ -109,11 +109,12 @@ git push origin
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -108,7 +107,7 @@ Enhorabona! Acabes de completar el procés de treball principal que et trobaràs
Ara, celebra la teva contribució i comparteix-la amb els teus amics i seguidors anant a [la web](https://firstcontributions.github.io/#social-share).
-Podeu unir-vos al nostre equip d'*slack* en cas de que necessiteu ajuda o tingueu alguna pregunta. [Unir-se a l'equip d'slack](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
+Si vols contribuir al projecte, pots començar amb aquesta [guia per contribuir al codi](https://github.com/roshanjossey/code-contributions).
A continuació, et pots preparar per contribuir a altres projectes. Hem reunit una llista de projectes amb tasques (*issues*) pendents fàcils per tal de poder començar. Fes un cop d'ull a [la llista de projectes aquí](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.cs.md b/docs/translations/README.cs.md
index 69701581..60cfa05b 100644
--- a/docs/translations/README.cs.md
+++ b/docs/translations/README.cs.md
@@ -112,6 +112,8 @@ Blahopřejeme! Právě jste dokončili standardní _fork -> clone -> edit ->_ pr
Oslavte svůj první příspěvek se svými přáteli a následovníky přes [webovou aplikaci](https://firstcontributions.github.io/#social-share).
+Pokud byste chtěli více praxe, můžete zkusit [code contributions](https://github.com/roshanjossey/code-contributions).
+
Nyní vám už nic nebrání v příspívání do ostatních projektů. Připravili jsme pro vás seznam projektů, které mají jednoduché záležitosti k vyřešení/naprogramování, se kterými můžete začít. Podívejte se [zde](https://firstcontributions.github.io/#project-list).
### [Další materiály](../additional-material/git_workflow_scenarios/additional-material.md)
diff --git a/docs/translations/README.da.md b/docs/translations/README.da.md
index 5e942c62..4ef764da 100644
--- a/docs/translations/README.da.md
+++ b/docs/translations/README.da.md
@@ -1,21 +1,18 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
-
# Første bidrag
Det er svært. Det er altid svært når det er første gang. Specielt hvis man samarbejder er det ikke rart at begå fejl. Vi vil simplificere den store udfordring det er for nybegyndere at lære om open-source, og at lave deres første bidrag.
At læse artikler og se video guides hjælper, men hvad er bedre end at bruge det i praksis? Dette projekt håber at kunne tilbyde vejledning og gøre det overkommeligt for alle at lave deres første open-source bidrag.
-#### *Hvis du ikke er komfortabel med command line, [her er vejledninger til GUI værktøjer](#Guides-med-andre-værktøjer)*
-
+#### _Hvis du ikke er komfortabel med command line, [her er vejledninger til GUI værktøjer](#Guides-med-andre-værktøjer)_
-Har du ikke Git på din maskine kan du [installere det]( https://help.github.com/articles/set-up-git/).
+Har du ikke Git på din maskine kan du [installere det](https://help.github.com/articles/set-up-git/).
## Fork dette repository
@@ -26,7 +23,7 @@ Dette vil lave en kopi af projektet i din Github konto.
-Næste trin er at "clone" dit nye repository til din maskine. Naviger til din Github account og åbn dit nye repository, derefter find "clone" øverst oppe og tryk på knappen. Tryk *copy to clipboard* ikonet.
+Næste trin er at "clone" dit nye repository til din maskine. Naviger til din Github account og åbn dit nye repository, derefter find "clone" øverst oppe og tryk på knappen. Tryk _copy to clipboard_ ikonet.
Åbn en terminal og kør den følgende git command:
@@ -39,9 +36,11 @@ hvor "din url" skal erstattes med den URL du kopieret i forrige trin.
Eksempel:
+
```
git clone https://github.com/dit-brugernavn/first-contributions.git
```
+
Erstat 'dit-brugernavn' med dit GitHub brugernavn. Her kopierer vi indholdet af first-contributions repositoriet fra din Github konto, til din lokale PC.
## Opret en branch
@@ -51,16 +50,20 @@ Erstat 'dit-brugernavn' med dit GitHub brugernavn. Her kopierer vi indholdet af
```
cd first-contributions
```
+
Derefter opretter du en branch med kommandoen `git checkout`:
+
```
git checkout -b
-
Hvis du går til konsollen og kører kommandoen `git status`, vil du se dine ændringer.
-
Tilføj disse ændringer til din branch med kommandoen `git add`:
+
```
git add Contributors.md
```
Derefter commit ændringerne med kommandoen `git commit`:
+
```
git commit -m "Add
+# First Contributions
-Aller Anfang ist schwer. Gerade dann, wenn wir gemeinsam an etwas arbeiten, will niemand etwas Falsches tun. Aber Open Source dreht sich um Kooperation und lebt von den Beiträgen vieler Freiwilliger. Deshalb haben wir es uns zur Aufgabe gemacht, neuen Mitgliedern in der Open-Source-Gemeinde ihre ersten Schritte so einfach wie möglich zu machen.
+Dieses Projekt zielt darauf ab, Anfängern den Einstieg zu erleichtern und sie bei ihrem ersten Beitrag zu unterstützen. Wenn du deinen ersten Beitrag leisten möchten, befolge die folgenden Schritte.
-Natürlich helfen die vorhandenen Artikel und Videoanleitungen. Aber was kann besser sein, als es einfach einmal auszuprobieren mit dem Wissen, dass man nichts kaputt machen kann? Dieses Projekt will Anfängern zeigen, wie sie möglichst einfach ihren ersten Beitrag leisten. Bedenke: Je entspannter du bist, desto besser lernst du. Wenn du deinen ersten Beitrag leisten möchtest, folge diesen einfachen Schritten. Wir versprechen dir, es wird Spaß machen.
+_Wenn du nicht weißt wie man das Terminal/CMD bedient, [hier findest du Anleitungen für GUI Tools.](#Anleitungen-für-andere-Tools)_
-Wenn du Git noch nicht installiert hast, [installiere es](https://help.github.com/articles/set-up-git/)
+
-## Repository forken
+#### Wenn du Git nicht auf deinem System installiert hast, [installiere es](https://...github.com/en/get-started/quickstart/set-up-git).
-Forke das Repository durch das Anklicken der Schaltfläche "Fork". Dadurch erhältst du deine eigene Version des Projektes in deinem Profil.
+## Forke dieses Repository
-## Repository klonen
+Forke dieses Repository indem du auf den Fork Button oben auf dieser Seite klickst.
+Dies wird eine Kopie dieses Repository's in deinem Account erstellen.
-
+## Klone das Repository
-Klone das Repository auf deinen Computer. Klicke auf die Schaltfläche "Clone or download" und anschließend auf das "copy to clipboard"-Symbol.
+
-Öffne eine Kommandozeile und gib den folgenden git-Befehl ein:
+Klone jetzt das geforkte Repository auf deinen Computer. Gehe zu deinem Github Account, öffne das geforkte Repository, drücke auf den Code Button, dann auf den SSH Tab und dann drücke auf das _copy url to clipboard_ icon.
-```
-git clone "Deine kopierte URL"
+Öffne ein Terminal Fenster und führe den folgenden Git Befehl aus:
+
+```bash
+git clone "kopierte url"
```
-Statt 'Deine kopierte URL' (ohne Anführungszeichen) füge die Repository-URL aus dem vorherigen Schritt ein.
+wobei "kopierte url" (ohne die Anführungszeichen) die url zu diesem Repository ist (deine Fork von diesem Projekt). Im vorherigen Schritt siehst du wie du diese erhälst .
-
+
-Beispiel:
+Zum Beispiel:
-```
-git clone https://github.com/dein-Name/first-contributions.git
+```bash
+git clone git@github.com:das-bist-du/erster-Beitrag.git
```
-An der Stelle 'dein-Name' muss dein GitHub-Nutzername stehen. Mit diesem Befehl kopierst du den Inhalt deines first-contributions-Repository von GitHub auf deinen Computer.
+wobei `das-bist-du` dein Github Nutzername ist. Hier kopierst du den Inhalt des first-contributions Repository's auf Github auf deinen Computer.
-## Erstelle einen Branch
+## Erstelle einen Zweig
-Wechsle zum Repository-Verzeichnis auf deinem Computer (falls du es nicht schon getan hast).
+Wechsle zum Repository Ordner (wenn du nicht bereits dort bist):
-```
+```bash
cd first-contributions
```
-Erstelle nun einen Branch mit dem Befehl `git checkout`:
+Erstelle nun einen Zweig, indem du den `git switch` Befehl benutzst:
-```
-git checkout -b
+
+Wenn du in den Projektordner gehst und den Befehl `git status`, ausführst werden dir die Änderungen angezeigt.
+
+Füge diese Änderungen nun zu dem Zweig hinzu den du gerade erstellt hast, indem du den Befehl `git add` ausführst.
+
+```bash
git add Contributors.md
```
-Nun committest du deine Änderungen mit `git commit`:
+Jetzt commite diese Änderungen mit dem `git commit` Befehl:
-```
-git commit -m "Add remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead. + remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information. + fatal: Authentication failed for 'https://github.com/+ Gehe zu [GitHub's tutorial](https://...github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account) wie du einen ssh Key zu deinem Account hinzufügst und konfigurierst. + Außerdem, kannst du 'git remote -v' ausführen um deine Remote Addresse anzuzeigen. + + Wenn es so aussieht: +/first-contributions.git/'
origin https://github.com/your-username/your_repo.git (fetch) + origin https://github.com/your-username/your_repo.git (push)+ + ändere es mit diesem Befehl: + ```bash + git remote set-url origin git@github.com:dein-nutzername/dein_repo.git + ``` + Ansonsten wirst du noch immer aufgefordert Passwort und Benutzername einzugeben und bekommst einen Authentifizierungs Fehler. +
+## Reiche deine Änderungen für ein Review ein
-Erstelle einen Pull Request indem du auf die Schaltfläche `Create pull request` klickst.
+Wenn du jetzt zu deinem Repository auf Github gehts, wirst du einen `Compare & pull request` Knopf sehen. Drücke diesen Knopf.
-
+
-Roshan Jossey wird nun deine Änderungen in den Master Branch dieses Projekts mergen. Du erhältst eine E-Mail, sobald dies geschehen ist.
+Jetzt, reiche deine Pull-Request ein.
-## Wie geht es weiter?
+
-Glückwunsch! Du hast so eben den Standard-Workflow _Fork -> Clone -> Edit -> Pull Request_ beendet, der dir als Mitwirkender häufig begegnen wird.
+Bald werde ich alle deine Änderungen in den Haupt-Zweig dieses Projektes mergen. Du wirst eine Benachrichtigungs Email bekommen sobald die Änderungen gemerged wurden.
-Feiere deinen Beitrag zum Projekt und teile ihn mit deinen Freunden und Followern über unsere [Web-App](https://firstcontributions.github.io/#social-share).
+## Was nun?
-Falls du jetzt zu anderen Projekten beitragen möchtest, dann haben wir für dich eine Liste von einfachen, ersten Issues zusammengestellt, an denen du arbeiten kannst. Diese Projekt-Liste findest du [in unserer Web-App](https://firstcontributions.github.io/#project-list).
+Gratulation! Du hast gerade den Standard _Forken -> Klonen -> Bearbeiten -> Pull-Request_ Workflow durchgeführt, dem du als Beitragender oft begegnen wirst!
-## Tutorials mit anderen Tools
+Feier deinen Beitrag und teile in mit deinen Freunden und Followern indem du hier drückst [web app](https://firstcontributions.github.io/#social-share).
+
+Wenn du gerne mehr Übung hättest, schau dir [code contributions](https://github.com/roshanjossey/code-contributions) an.
+
+Jetzt los gehts, mit Beiträgen zu anderen Projekten. Wir haben eine Liste von Projekten mit leichten Fehlern für Einsteiger bereitgestellt. Schau dir [die Liste der Projekte in der Web-App an](https://firstcontributions.github.io/#project-list) an.
+
+### [Zusätzliches Material](../additional-material)
+
+## Anleitungen für andere Tools
| Dieses Projekt wird unterstützt von:
+
+
+
+
+
-En caso de no tener instalado Git en tu equipo, te dejo una para [guia]( https://git-scm.com/book/es/v2/Inicio---Sobre-el-Control-de-Versiones-Instalaci%C3%B3n-de-Git) para instalarlo.
+En caso de no tener instalado Git en tu equipo, te dejo una [guia]( https://git-scm.com/book/es/v2/Inicio---Sobre-el-Control-de-Versiones-Instalaci%C3%B3n-de-Git) para instalarlo.
## Has un "Fork" de este repositorio
@@ -23,15 +23,15 @@ Presiona el boton "fork" de este repositorio en la parte superior derecha de la
-Ahora clona el repositorio al que le hiciste un fork previamente, el URL del repositorio deberia estar asi `https://github.com/
@@ -39,7 +39,7 @@ Por ejemplo:
```
git clone https://github.com/
@@ -82,12 +91,35 @@ reemplazando `remote: El soporte para la autenticación de contraseña se eliminó el 13 de agosto de 2021. Utiliza un token de acceso personal en su lugar. + remote: Consulta [https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/](https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/) para obtener más información. + fatal: Fallo en la autenticación para '[https://github.com/](https://github.com/)+ Ve al [tutorial de GitHub](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account) sobre cómo generar y configurar una clave SSH en tu cuenta. + + Además, es posible que desees ejecutar `git remote -v` para verificar tu dirección remota. + + Si se ve algo como esto: +/first-contributions.git/'
origin [https://github.com/tu-usuario/tu_repo.git] (fetch) + origin [https://github.com/tu-usuario/tu_repo.git] (push)+ + + cámbialo usando este comando: + ```bash + git remote set-url origin git@github.com:tu-usuario/tu_repo.git + ``` + De lo contrario, aún se te pedirá un nombre de usuario y contraseña y obtendrás un error de autenticación. +
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
# <add-your-name> بإسم الفرع اللي انت لسة عامله .remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead. + remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information. + fatal: Authentication failed for 'https://github.com/+ أسهل طريقة لحل المشكلة انك تعمل ssh key وتحطه علي GitHub + [GitHub's Tutorial - Create an ssh key](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/generating-a-new-ssh-key-and-adding-it-to-the-ssh-agent) + [GitHub's tutorial - adding ssh key to your account](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account) + بكده هتكون authenticated و مش هيكون عندك مشكلة لما تعمل push + + تقدر تتاكد انك بترفع علي الريبو الصح لما تكتب في ال + ```bash + git remote -v + ``` + لو ظهرلك كده: +/first-contributions.git/'
origin https://github.com/your-username/your_repo.git (fetch) + origin https://github.com/your-username/your_repo.git (push)+ يبقي معندكش مشكلة + غير كده تقدر تغير ال remote address كده + ```bash + git remote set-url origin git@github.com:your-username/your_repo.git + ``` +
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -117,8 +116,6 @@ Well done! Ye jus' completed th' standard _fork -> clone -> edit -> PR_ workflow
Celebrate yer contribution 'n share it wit' yer hearties 'n followers by goin' t' [web app](https://firstcontributions.github.io/#social-share).
-Ye could join our slack crew in case ye needs any help or 'ave any riddles. [Join our slack crew](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
-
Now let's get ye started wit' contributin' t' other projects. We've compiled a list o' projects wit' easy issues ye can get started on. Check out [th' list o' projects in web app](https://firstcontributions.github.io/#project-list).
### [Additional material](../additional-material/git_workflow_scenarios/additional-material.md)
diff --git a/docs/translations/README.es.md b/docs/translations/README.es.md
index 56cbc176..aaefd123 100644
--- a/docs/translations/README.es.md
+++ b/docs/translations/README.es.md
@@ -1,5 +1,4 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -83,7 +82,7 @@ Ahora haz un *commit* sobre estos cambios ejecutando el comando `git commit`:
```
git commit -m "Add
+
-Si vous n'avez pas git sur votre ordinateur, [ installez-le ]( https://help.github.com/articles/set-up-git/ ).
+Si vous n'avez pas encore Git installé sur votre machine, [ installez-le ]( https://help.github.com/articles/set-up-git/ ).
-## Embranchez ce répertoire (aussi appelé un Fork)
+## Faire un fork de ce dépôt
-Embranchez ce répertoire en cliquant sur le bouton de fork en haut de la page.
-Cela va créer une copie du répertoire sur votre compte.
+Forkez ce dépôt en cliquant sur le bouton *fork* en haut de cette page.
+Cela créera une copie de ce dépôt dans votre propre compte GitHub
## Clonez ce répertoire
-Maintenant, clonez ce répertoire sur votre ordinateur. Cliquez sur le bouton clone puis cliquez sur l'icône *copier dans le presse-papier*.
+Maintenant, clonez ce répertoire sur votre ordinateur. Allez sur votre compte GitHub, ouvrez le dépôt forké, cliquez sur le bouton *Code*, puis sur l’onglet *SSH* et enfin sur l’icône *copier dans le presse-papiers*.
-Ouvrez une invite de commande (si vous êtes sous Windows) ou un terminal (si vous êtes sous MacOS ou Linux) et exécutez les commandes git suivantes :
+Ouvrez une invite de commande (si vous êtes sous Windows) ou un terminal (si vous êtes sous MacOS ou Linux) et exécutez la commande git suivante :
```
git clone "l'url que vous venez de copier"
```
-où "l'url que vous venez de copier" (sans les guillemets) est l'url du répertoire. Voir la section précédente afin d'obtenir l'url.
+où "l'url que vous venez de copier" (sans les guillemets) est l'url du dépôt forké. Revoir les étapes précédentes pour obtenir l’URL exacte.
@@ -38,7 +38,7 @@ Par exemple :
```
git clone https://github.com/votre-nom-d-utilisateur/first-contributions.git
```
-où `votre-nom-d-utilisateur` est votre nom d'utilisateur GitHub. Ici vous êtes en train de copier le contenu du répertoire `first-contributions` depuis GitHub sur votre ordinateur.
+où `votre-nom-d-utilisateur` est votre nom d'utilisateur GitHub. Ici vous êtes en train de copier le contenu du dépôt `first-contributions` depuis GitHub sur votre ordinateur.
## Créez une branche
@@ -56,42 +56,77 @@ Par exemple :
```
git checkout -b add-koffi-sani
```
-(Le nom de la branche n'a pas besoin de contenir le terme *add*, mais c'est raisonnable de l'inclure parce que l'objectif de cette branche est d'ajouter votre nom à une liste.)
+(Le nom de la branche n'a pas besoin de contenir le terme *add*, mais il est mieux de l'inclure car l'objectif de cette branche est d'ajouter votre nom à une liste.)
-## Effectuez les modifications nécessaires et engagez-les
+
+
+Si vous ouvrez l'invite de commande et que vous exécutez la commande `git status`, vous verrez qu'il y a des modifications. Ajoutez ces modifications à la branche que vous venez de créer avec la commande `git add` :
```
git add Contributors.md
```
-Maintenant engagez ces modifications avec la commande `git commit`:
+Maintenant faites un commit de ces modifications avec la commande `git commit`:
```
git commit -m "Add remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead. remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information. fatal: Authentication failed for 'https://github.com/+Suivez le tutoriel GitHub pour générer et configurer une clé SSH sur votre compte. -/first-contributions.git/'
+Vous pouvez également exécuter git remote -v pour vérifier votre adresse distante.
-Maintenant soumettez la demande de tirage.
+Si elle ressemble à ceci :
-
+origin https://github.com/ton-nom-utilisateur/ton_repo.git (fetch) origin https://github.com/ton-nom-utilisateur/ton_repo.git (push)+Modifiez-la avec cette commande : -Sous peu j'aurai fusionné toutes vos modifications avec la branche main de ce projet. Vous recevrez un mail de notification dès que la fusion sera effectuée. +``` +git remote set-url origin git@github.com:ton-nom-utilisateur/ton_repo.git +``` +Sinon, vous continuerez de devoir entrer votre mot de passe et vous obtiendrez une erreur d’authentification. -La branche main de votre embranchement ne subira pas de modification à cet instant. Pour que votre embranchement soit synchronisé avec le mien, suivez les étapes suivantes. +
+
+Soumettez ensuite la *pull request*.
+
+
+
+Je fusionnerai bientôt vos modifications dans la branche principale du projet.
+Vous recevrez un e-mail de confirmation une fois que ce sera fait.
+
+La branche main de votre dépôt forké ne subira pas de modification. Pour que votre dépôt soit synchronisé avec le mien, suivez les étapes suivantes.
## Gardez votre embranchement synchronisé avec ce répertoire
@@ -113,13 +148,13 @@ Ici nous cherchons toutes les modifications dans mon embranchement (upstream rem
```
git rebase upstream/main
```
-Ici nous appliquons toutes les modifications que vous avez cherché à la branche main. Si vous poussez la branche main maintenant, votre embranchement aussi aura les modifications :
+Ici nous appliquons toutes les modifications que vous avez récupéré à la branche main. Si vous poussez la branche main maintenant, votre embranchement aussi aura les modifications :
```
git push origin main
```
-Avertissement: Cette fois, vous poussez au répertoire distant appelé origin.
+Avertissement: Cette fois, vous poussez les modifications au répertoire distant appelé origin.
-A ce niveau j'ai fusionné votre branche `
-Τώρα υποβάλλετε το pull request.
+Τώρα υποβάλετε το pull request.
diff --git a/docs/translations/README.guj.md b/docs/translations/README.guj.md
index e880ca46..8668eff4 100644
--- a/docs/translations/README.guj.md
+++ b/docs/translations/README.guj.md
@@ -1,7 +1,7 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
+
# પ્રથમ યોગદાન
પ્રથમ વખત કંઈક કરવું થોડું મુશ્કેલ છે. ખાસ કરીને જ્યારે તમે જુથ સાથે મળીને કામ કરી રહ્યા હોવ, ત્યારે ભૂલો કરવી એ સારી વાત નથી. પરંતુ એકબીજા સાથે મળીને અને એક જ સાથે કામ કરવું એ જ તો ઓપેન સોર્સ છે. અમે તમારું પ્રથમ ઓપન સોર્સ કોન્ટ્રિબ્યુશન / યોગદાન સરળ બનાવાનો પ્રયત્ન કરીશુ.
@@ -14,27 +14,22 @@
જો તમારા કમ્પ્યુટર પર Git ઇન્સ્ટોલ નથી, [ તો Git ઈન્સ્ટોલ કરો](https://help.github.com/articles/set-up-git/)
-
## રિપોઝીટરીને ફોર્ક કરો
ફોર્ક(કાંટા) બટન પર ક્લિક કરવાથી આ રિપોઝીટરી ફોર્ક થાય છે, આ તમારા GitHub એકાઉન્ટમાં આ રિપોઝીટરીની એક નકલ (કોપી) બનાવશે.
-
## રિપોઝીટરી ક્લોન કરો
-
હવે તમે આ રેપો તમારા કમ્પ્યુટરમાં ક્લોન કરો (અર્થાત ડાઉનલોડ કરો). તમારા GitHub એકાઉન્ટ પર જાવ, કોડ બટન પર ક્લિક કરો અને પછી `copy to clipboard` આઇકોન પર ક્લિક કરો. આનાથી એ રેપોજીટરીનો યુઆરએલ કોપી થશે.
-
તમારા કમ્પ્યુટર પર એક ટર્મિનલ / કમાંડ પ્રોમ્પ્ટ ખોલો અને નીચે દર્શાવ્યા મુજબ git આદેશ ચલાવો:
```
git clone "યુઆરએલ જે તમે હમણાં જ નકલ(ક્લોન) કરી"
```
-
જ્યાં "યુઆરએલ જે તમે હમણાં જ કોપી કર્યું છે" (અવતરણ ચિહ્નો સિવાય) એ આ રિપોઝીટરી(આ પ્રોજેક્ટનો તમારો ફૉર્ક) ની URL ના સંગ્રહ માટે છે. તેની URL ને મેળવવા માટે પાછલા પગલાં જુઓ. તેમને કોપી કરેલ યુઆરએલ સાથે બદલી કાઢો.
ઉદાહરણ તરીકે:
@@ -45,19 +40,16 @@ git clone https://github.com/આ-તમે-છો/first-contributions.git
-
'આ-તમે-છો' તમારા GitHub એકાઉન્ટનું `username` છે. અહીં તમે તમારા કમ્પ્યુટરમાં GitHub થી first-contributions રિપોને કોપી કરી રહ્યા છો અથવા તેના એક સ્થાનિક / લોકલ કોપી બનાવી રહ્યા છે.
## એક બ્રાંચ બનાવો
તમારા કમ્પ્યુટર પર બનાવેલ રિપોઝીટરીની કોપીનાં ફોલ્ડર / ડિરેક્ટરીમાં જાવ (જો હજુ સુધી તમે ત્યાં ન હોવ તો નીચે આપેલ Command(આદેશ) ચલાવો)
-
```
cd first-contributions
```
-
હવે 'git checkout' command(આદેશ) નો ઉપયોગ કરીને એક નવી શાખા(Branch) બનાવો. નવી શાખા(Branch) બનાવવા માટે -b વિકલ્પનો ઉપયોગ થાય છે.
```
@@ -70,25 +62,20 @@ git checkout -b <તમારી-શાખા-નામ-ઉમેરો>
git checkout -b add-alonzo-church
```
-
(શાખા(Branch)ના નામમાં 'add' ઉમેરવાની જરૂર નથી, પરંતુ તેમાં શામેલ કરવું યોગ્ય છે કારણ કે શાખા(Branch)નો હેતુ એક નામ છે, જે નામ ઉમેરવાનું છે.)
## આવશ્યક ફેરફારો કરો અને તે ફેરફારોને કમીટ કરો-
-
હવે 'Contributors.md` ફાઇલને એક ટેક્સ્ટ એડિટરમાં ખોલો અને તેમા તમારુ નામ લખો. ફાઇલની શરૂઆત અથવા અંતે ઉમેરવાને બદલે, તેને મધ્યમાં ગમે ત્યાં રાખો. હવે, ફાઇલને સેવ કરો.
-
જો તમે પ્રોજેક્ટની ડાઈરેક્ટરીમા જશો અને કમાન્ડ પ્રોમ્પ્ટમાં `git status` નિર્દેશ ચલાવશો, તો તમે કરેલા પરિવર્તન જોઈ શક્શો. તે પરિવર્તન બનાવવામાં આવેલ શાખા(Branch)માં ઉમેરવા માટે 'git add` કમાન્ડ વાપરો.
-
```
git add Contributors.md
```
-
હવે તમારા પોતાના ફેરફારોને 'git commit' આદેશનો ઉપયોગ કરી કમીટ કરો.
```
@@ -97,8 +84,8 @@ git commit -m "Add <તમારુ-નામ> to Contributors list"
<તમારુ નામ> ની જગ્યાએ તમારું નામ દાખલ કરો
+##
-##
તમારા ફેરફારો ને Github માં પુશ કરો (ધકેલો).
`git push` ઉપયોગ કરીને તમારા પરિવર્તન ને પુશ કરો
@@ -111,7 +98,6 @@ git push origin <તમારી-શાખા-નામ-ઉમેરો>
## તમારા ફેરફારોના રીવ્યુ માટે સબમિટ કરો
-
જો તમે તમારા github એકાઉન્ટ પર તમારી રિપો માં જાવ તો Compare & pull request નો ઓપ્શન હશે. તેને દબાવો.
@@ -121,23 +107,18 @@ git push origin <તમારી-શાખા-નામ-ઉમેરો>
ટૂંક સમયમાં હું તમારા ફેરફારો માટે આ પ્રોજેક્ટની માસ્ટર શાખામાં મર્જ ક્રી દઇશ. તમને એક મેલ આવશે જ્યારે તમારા ફેરફારો મર્જ થશે.
-
## હવે, અહીંથી ક્યાં જવું ?
અભિનંદન!:tada: તમે હમણાં જ સ્ટાન્ડર્ડ `fork -> clone -> edit -> pull request` વર્કફ્લો પૂર્ણ કર્યો છે. જેનો તમે વારંવાર સહયોગકર્તા (contributor) તરીકે સામનો કરશો!
-
તમારા પ્રથમ યોગદાનની ઉજવણી કરો અને [વેબ એપ્લિકેશન](https://firstcontributions.github.io/#social-share) પર જઈને તમારા મિત્રો અને ફોલોઅર્સ સાથે શેર કરો.
-
-
-જો તમને કોઈ મદદની જરૂર હોય અથવા તમારી કોઈ સમસ્યા હોય તો તમે અમારી સ્લેક ટીમમા જોડાઈ શકો છો. [સ્લેક ટીમ જોઈન કરો.](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
-
+જો તમને વધુ પ્રેક્ટિસ જોઈતી હોય, તો [કોડ યોગદાન ચેકઆઉટ](https://github.com/roshanjossey/code-contributions) કરો.
ચાલો, હવે તમને અન્ય પ્રોજેક્ટ્સમાં કંટ્ર્રીબ્યુટ કરવામા મદદ કરુ. અમે તમારા માટે એક યાદી બનાવી છે જેમા ખૂબ સરળ issues(મુદ્દાઓ) છે વેબ એપમા પ્રોજેક્ટ્સ ની સૂચિ જુઓ.](https://firstcontributions.github.io/#project-list)
## અન્ય સાધનોનો ઉપયોગ કરીને ટ્યુટોરીયલ્સ
|
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
diff --git a/docs/translations/README.id.md b/docs/translations/README.id.md
index 7e9871e2..d74eb953 100644
--- a/docs/translations/README.id.md
+++ b/docs/translations/README.id.md
@@ -26,17 +26,17 @@ Sekarang kloning repositori yang sudah Anda _fork_ ke komputer Anda. Pergi ke ak
Buka sebuah terminal dan jalankan perintah git berikut:
```
-git clone "url yang telah disalin"
+git clone "url yang telah Anda disalin"
```
-bagian "url yang telah disalin" (tanpa tanda petik) adalah url ke repositori ini (proyek yang telah Anda _fork_ ini). Lihat langkah sebelumnya untuk mendapatkan url.
+bagian "url yang telah Anda disalin" (tanpa tanda petik) adalah url ke repositori ini (proyek yang telah Anda _fork_ ini). Lihat langkah sebelumnya untuk mendapatkan url.
-Sebagai contoh:
+Contohnya:
```
-git clone https://github.com/ini-adalah-anda/first-contributions.git
+git clone git@github.com:ini-adalah-anda/first-contributions.git
```
bagian `ini-adalah-anda` adalah nama pengguna GitHub Anda. Di sini Anda menyalin konten dari repositori first-contributions di GitHub ke komputer Anda.
@@ -55,12 +55,25 @@ Sekarang buatlah sebuah _branch_ menggunakan perintah `git checkout`:
git checkout -b origin https://github.com/your-username/your_repo.git (fetch) + origin https://github.com/your-username/your_repo.git (push)+ + Buat perubahan dengan perintah: + +
git remote set-url origin git@github.com:your-username/your_repo.git+ + Jika tidak, Anda akan tetap dimintai nama pengguna dan kata sandi serta mendapatkan kesalahan autentikasi. + ## Kirim Perubahan Untuk Diperiksa Jika Anda membuka repositori Anda di GitHub, Anda akan melihat sebuah tombol `Compare & pull request`. Tekan tombol tersebut. @@ -133,3 +157,10 @@ Sekarang mari kita mulai dengan berkontribusi di proyek lain. Kami sudah menyusu |
Proyek ini didukung oleh:
+
+
+
+
+
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
+
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
diff --git a/docs/translations/README.ka.md b/docs/translations/README.ka.md
index bfdd7426..2c3ae195 100644
--- a/docs/translations/README.ka.md
+++ b/docs/translations/README.ka.md
@@ -81,7 +81,7 @@ git push origin <ನಿಮ್ಮ ಶಾಖೆಯ ಹೆಸರನ್ನು ಸೇ
## ಇಂದಿನಿಂದ ಏನು?
ಅಭಿನಂದನೆಗಳು! ನೀವು ಕೊಡುಗೆದಾರರಾಗಿ ಆಗಾಗ್ಗೆ ಎದುರಾಗುವ ಪ್ರಮಾಣಿತ _fork -> clone -> edit -> PR_ ವರ್ಕ್ಫ್ಲೋ ಅನ್ನು ನೀವು ಇದೀಗ ಪೂರ್ಣಗೊಳಿಸಿದ್ದೀರಿ!
ನಿಮ್ಮ ಕೊಡುಗೆಯನ್ನು ಆಚರಿಸಿ ಮತ್ತು ಅದನ್ನು ನಿಮ್ಮ ಸ್ನೇಹಿತರು ಮತ್ತು ಅನುಯಾಯಿಗಳೊಂದಿಗೆ ಹಂಚಿಕೊಳ್ಳಿ [ವೆಬ್ ಅಪ್ಲಿಕೇಶನ್](https://firstcontributions.github.io/#social-share).
-ನಿಮಗೆ ಯಾವುದೇ ಸಹಾಯ ಬೇಕಾದರೆ ಅಥವಾ ಯಾವುದೇ ಪ್ರಶ್ನೆಗಳಿದ್ದಲ್ಲಿ ನೀವು ನಮ್ಮ slack team ಸೇರಬಹುದು. [Slack team ಸೇರಿ](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
+ನೀವು ಹೆಚ್ಚಿನ ಅಭ್ಯಾಸವನ್ನು ಬಯಸಿದರೆ, ಪರಿಶೀಲಿಸಿ [ಕೋಡ್ ಕೊಡುಗೆಗಳು](https://github.com/roshanjossey/code-contributions).
ಈಗ ನೀವು ಹೆಚ್ಚಿನ ಯೋಜನೆಗಳಿಗೆ ಕೊಡುಗೆ ನೀಡಲು ಪ್ರಾರಂಭಿಸಬಹುದು. ನಾವು ನಿಮಗಾಗಿ ಒಂದು ಪಟ್ಟಿಯನ್ನು ತಯಾರಿಸಿದ್ದೇವೆ ಅದು ಬಹಳ ಸುಲಭವಾದ ಸಮಸ್ಯೆಗಳು. [ಯೋಜನೆಗಳ ಪಟ್ಟಿ](https://firstcontributions.github.io/#project-list)
## ಇತರ ಪರಿಕರಗಳನ್ನು ಬಳಸುವ ಟ್ಯುಟೋರಿಯಲ್
|
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -124,17 +123,15 @@ git push -u origin your-branch-name
첫 기여에 대한 소식을 친구들 및 팔로워에게 [웹 앱](https://firstcontributions.github.io/#social-share)을 통해 공유해보세요.
-도움이 필요하거나 질문이 있다면 저희 slack 팀에 참여할 수 있습니다. → [slack 팀 참여하기](https://firstcontributors.slack.com/join/shared_invite/zt-29qhyr9lt-Bi7WLbgGIFqV7aCEG_grvg#/shared-invite/email)
-
이제 다른 프로젝트에도 기여해보세요! 지금 바로 시작할 수 있는 난이도가 낮은 이슈들로 가득찬 목록이 있습니다. [웹앱의 프로젝트 목록](https://firstcontributions.github.io/#project-list)에서 확인해보세요.
### [추가 자료](../additional-material/translations/Korean/additional-material.ko.md)
## 다른 도구들을 사용한 튜토리얼
-| This project is supported by:
diff --git a/docs/translations/README.lt.md b/docs/translations/README.lt.md
index f7a75434..21e101c4 100644
--- a/docs/translations/README.lt.md
+++ b/docs/translations/README.lt.md
@@ -1,5 +1,4 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[ Энэ төслийг дэмжсэн:
+
+
-د دې پاڼې په سر کې د فورک تڼئ پر کلیک سره تاسو کولای شئ دا repository فورک کړئ، فورک به د دې repository یوه کاپي ستاسو د کیټ هب په اکونټ کې جوړه کړي.
- اوس فورک کړل شوې ریپوزیټوري کلون یعنې ښکته کړئ د دې کار د ترسره کولو لپاره خپل اکونټ ته لاړ شی د کوډ پر تڼۍ کلیک وکړئ او د ریپوزیټوري لینک کاپي کړئ. ترمینل یا CMD خلاص کړئ او لاندې د کیټ کمنډ رن کړئ د بیلکې په توګه په پورته لینک کې د MasihKarimi پرځای باید ستاسو د کیټ هب د اکونټ نوم وي د پورته قدمونو په اخیستلو سره تاسو د “first-contributions” ذخیره یا ریپوزیټوري خپل کمپیوټر ته ښکته کوۍ. اوس د first-contributions پروژه په خپل کوډ ایډیټر کې پرانيزی او په ترمینل کې د لاندې کیټ کمنډ په رن کولو سره نوی برانچ یا څانګه جوړه کړئ. د بیلکې په توګه add-Masih-Karimi زما د څانګې نوم دی تاسو کولائ شئ خپل نوم غوره کړئ اوس د contributors.md فایل راخلاص کړئ او خپل نوم مو وراضافه کړئ نوم مو د فایل په شروغ یا اخر کې مه اضافه کوئ په منځ کې یې اضافه کړئ او فایل ذخیره کړئ اوس که چېرې ټرمینل ته ولاړ شئ او د git status کمنډ رن کړئ تاسو کولائ شئ وګورئ چې په کوم فایل کې مو بدلونونه راوستي دي په دې برخه کې د git add کمنډ په مرسته خپل بدلونونه خپل نوي جوړې کړل شوې څانګې ته اضافه کړئ: اوس اضافه کړل شوي بدلونونه د لاندې کمنډ په مرسته ترسره یا commit کړئ: د Masih Karimi پر ځای مو خپل نوم ولیکئ په دې برخه کې د git push کمنډ په مرسته خپل بدلونونه کیټ هب ته پورته کړئ د بېلګې په توګه هېر نه کړئ چې د add-Masih-Karimi پر ځای د خپلې څانګې نوم ورکړئ اوس که چېرې دې ریپوزیټوري ته په خپل کیټ هب اکونټ کې ورشئ تاسو به یو یوه تنۍ د Compare & pull request متن سره ووینۍ. دا تنۍ کیکاږئ اوس د pull غوښتنه وسپارئ له دې ورسته به زه ستاسو راوستي بدلونه د اصلي یا main څانګې سره یوځای کړم او ستاسو نوم به د ګډون کوونکو لیست ته اضافه کړل شي.
-بریا!! !! تاسو په بریالیتوب سره د فورک، کلون ، ایډټ او پول غوښتنې چارې ترسره کړې ، د دې چارو سره به مو د یو ګډون کوونکي په توګه همیش سر او کار وي.
-
-خپل لومړئ ګډون مو ولمانځئ او له خپلو ملګرو سره یې شریک کړئ
+تاسو په بریالیتوب سره د فورک، کلون، ایډیټ، او pull request مرحلې بشپړې کړې. تاسې له دې نه وروسته کولی شئ چې په خلاص-سرچېنه پروژو کې په همدې طریقه برخه واخلئ.
- که چېرې کومه ستونزه او پوښتنه لرئ کولائ شئ زموږ د سلک slack ټیم سره یوځائ شئ
-اوس راځئ په نورو پروژو کې ګډون وکړئ موږ د هغو پروژو لیست جمتو کړئ دئ چې تاسو کولائ شئ په آسانی ګډون پکې وکړئ د پروژو لیست دلته وګورئ
-
-
-
-# لومړنۍ مرستې
-د دې پروژې موخه دا ده چې د پیل کونکو لپاره د دوی لومړنۍ مرسته کولو لاره ساده او لارښود کړي. که تاسو د خپلې لومړۍ مرستې په لټه کې یاست، لاندې مرحلې تعقیب کړئ.
-
-_که تاسو د کمانډ لاین (CLI) سره راحته نه یاست ، [دا لارښوونې وکاروئ ترڅو پوه شئ چې د GUI وسیلو کارولو څرنګوالی](#د-نورو-وسیلو-کارولو-لارښوونې)._
-
-
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -8,11 +7,13 @@
Sunku. Visada sunku ką nors padaryti pirmą kartą. Ypač bendradarbiaujant, klaidų darymas nėra malonus dalykas. Tačiau atviras kodas - tai bendravimas ir bendradarbiavimas. Mes norime paprasčiau paaiškinti naujiesiems atvirojo kodo kūrėjams, kaip jie gali prisidėti pirmą kartą.
-Galite pradėti skaityti straipsnius ir žiūrėti vadovus, bet kas gali būti geriau nei mokymasis darant be klaidų pirmą kartą? Šio projekto tikslas - suteikti patarimus ir supaprastinti tai, kaip naujokai daro pirmąjį indėlį. Prisiminkite: kuo labiau esate atsipalaidavęs, tuo geriau mokotės. Jei norite atlikti pirmąjį indėlį, atlikite toliau pateiktus paprastus veiksmus. Mes pažadame, tai bus smagu.
+Galite pradėti skaityti straipsnius ir žiūrėti vadovus, bet kas gali būti geriau nei mokymasis darant be klaidų pirmą kartą? Šio projekto tikslas - suteikti patarimus ir supaprastinti tai, kaip naujokai atlieka savo pirmąjį indėlį. Prisiminkite: kuo labiau atsipalaidavę esate, tuo geriau mokotės. Jei norite atlikti pirmąjį indėlį, atlikite toliau pateiktus paprastus veiksmus. Mes pažadame, tai bus smagu.
+
+_Jei nesate pratę dirbti su komandine eilute, [čia rasite vadovą, naudojantį GUI įrankius.](#tutorials-using-other-tools)_
-Jei neturite instaliuoto git, [ instaliuokite čia ]( https://help.github.com/articles/set-up-git/).
+#### Jei neturite instaliuoto git, [instaliuokite čia](https://help.github.com/articles/set-up-git/).
## Kopijuokite (fork) šią saugyklą
@@ -28,9 +29,9 @@ Dabar klonuokite šią saugyklą į savo kompiuterį. Spustelėkite klonavimo my
Atidarykite terminalą ir paleiskite šią git komandą:
```
-git clone "kopijuota nuoroda"
+git clone "kątik nukopijuota nuoroda"
```
-kur "kopijuota nuoroda" (be citatos ženklų) yra url nuoroda jūsų saugyklai. Peržiūrėkite ankstesnius veiksmus, kad gautumėte url nuorodą.
+kur "kątik nukopijuota nuoroda" (be citatos ženklų) yra url nuoroda jūsų saugyklai (jūsų projekto kopijai). Peržiūrėkite ankstesnius veiksmus, kad gautumėte url nuorodą.
@@ -47,20 +48,35 @@ Pakeiskite kompiuterio saugyklos katalogą (jei dar to nepadarėte anksčiau):
```
cd first-contributions
```
-Dabar sukurkite šaką naudodami komandą `git checkout`:
+Dabar sukurkite šaką naudodami komandą `git branch`:
```
-git checkout -b Jei gavote klaidos pranešimą naudodami git switch, spauskite čia:
+
+Jei klaidos pranešimas yra "Git: `switch` is not a git command. See `git –help`", tikėtinai naudojate seną git versiją.
+
+Tokiu atveju bandykite `git checkout`:
+
+```bash
git checkout -b add-vardenis-pavardenis
```
-(Saugyklos pavadinime neturi būti žodžio *add*, bet tai yra reikalinga, kadangi šios šakos (branch) paskirtis yra įtraukti savo vardą į sąrašą.)
+
+ Jei gaunate klaidos pranešimą išsaugodami pakeitimus, spauskite čia:
+
+- ### Autentifikacijos klaida
+ remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead.
+ remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information.
+ fatal: Authentication failed for 'https://github.com/
+ [GitHub vadovas](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account) padės jums sugeneruoti ir sukonfiguruoti SSH raktą savo paskyroje.
+
+ Taip pat, galbūt norėsite pabandyti 'git remote -v', skirtą patikrintite savo nuotolinį adresą (remote address).
+
+ Jei jis atrodo taip ar panašiai:
+ origin https://github.com/your-username/your_repo.git (fetch)
+ origin https://github.com/your-username/your_repo.git (push)
+
+ pakeiskite jį, naudodami komandą:
+ ```bash
+ git remote set-url origin git@github.com:your-username/your_repo.git
+ ```
+ Kitu atveju jūsų vis tiek sulauksite klausimo apie savo vartotojo vardą ir slaptažodį ir sulauksite autentifikacijos klaidos.
+
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
diff --git a/docs/translations/README.mn.md b/docs/translations/README.mn.md
new file mode 100644
index 00000000..13fdf24a
--- /dev/null
+++ b/docs/translations/README.mn.md
@@ -0,0 +1,162 @@
+[](https://github.com/firstcontributions/open-source-badges)
+[](https://opensource.org/licenses/MIT)
+[](https://www.codetriage.com/roshanjossey/first-contributions)
+
+# First Contributions
+
+Нээлттэй эх код баазад өөрийн хувь нэмрээ оруулах хүсэл програмч болгонд байдаг байх. Харин яг хаанаас эхлэхээ мэдэхгүй үе тохиолдох нь элбэг. Иймд, бид хэд шиг будилсан хөгжүүлэгч нарт ядаж хийх үйлдлийн зохих дарааллыг нь таниулчих зорилгоор энэхүү төсөл нь эхэлжээ. Та ч бас нээлттэй эх код баазад өөрийн нэмрээ оруулмаар байгаа бол доорх алхмуудыг дагаад хийгээрэй.
+
+
+_Терминалтай ажиллах дургүй бол [GUI ашигласан хичээл рүү ороорой.](#tutorials-using-other-tools)_
+
+
+
+#### Компьютер дээрээ git суулгаагүй бол [энд дарж суулгана уу.](https://docs.github.com/en/get-started/quickstart/set-up-git).
+
+## Энэ рэпог форклох
+
+Та энэ хуудасны дээд хэсэгт орших fork товчийг дарснаар энэ рэпоны хуулбар таны хаягт үүсэх юм.
+
+## Энэ рэпог хувилах
+
+
+
+Форк хийчихсэн рэпогоо компьютер дээрээ суулгахын тулд хлээд Гитхаб хаяг дээрээ очоод, форклосон рэпогоо олоод, code гэсэн товчин даар дараад, SSH хэсэг дээр дарж, _хуулах_ товчлуур дээр дарах хэрэгтэй.
+
+Дараа нь, терминалаа нээгээд доорх үйлдлийг хийнэ:
+
+```bash
+git clone "саяны хуулсан линк"
+```
+
+"саяны хуулсан линк" хэсгийн оронд эхний алхам дээр хуулсан линкээ наана.
+
+
+
+Жишээ нь:
+
+```bash
+git clone git@github.com:таны-гитхаб-хаяг/first-contributions.git
+```
+
+`таны-гитхаб-хаяг` гэсний оронд Гитхабын хэрэглэгчийн нэрээ бичнэ. Ингэснээр та өөрийн хаяг дээрээ үүсгэсэн энэхүү рэпоны хуулбарыг өөрийн компьютер дээрээ хувилан авч чадлаа.
+
+## Шинэ бранч үүсгэх
+
+Дараа нь, хувилсан рэпоныхоо фолдер луу шилжинэ:
+
+```bash
+cd first-contributions
+```
+
+`git switch` үйлдлийг ашиглан шинэ бранч үүсгэнэ:
+
+```bash
+git switch -c шинэ-бранчийн-нэр
+```
+
+Жишээ нь:
+
+```bash
+git switch -c add-alonzo-church
+```
+
+ git switch үйлдлийг хийхэд ямар нэгэн алдаа гарсан бол энд дар:
+
+Дараах алдаа гарсан бол Гит програмын чинь хувилбар нийцэхгүй байна гэсэн үг: "Git: `switch` is not a git command. See `git –help`"
+
+Дээрх тохиолдолд `git checkout` үйлдлийг хэрэглээд үзээрэй:
+
+```bash
+git checkout -b шинэ-бранчийн-нэр
+```
+
+
+
+Дараа нь, үндсэн фолдер луу шилжээд `git status` үйдлийг хийвэл танд таны өөрчилсөн файлууд харагдана.
+
+Харагдаж буй өөрчлөлтүүдээ эхлээд бранчдаа `git add` үйлдлийг ашиглан нэмнэ:
+
+```bash
+git add Contributors.md
+```
+
+Дараа нь `git commit` үйлдлийг ашиглан коммит хийнэ (`your-name` гэснийг нэмсэн нэрээрээ солихоо мартуузай):
+
+```bash
+git commit -m "Add your-name to Contributors list"
+```
+
+## Гитхаб руу пушлэх
+
+Дараа нь, `git push` үйлдлийг ашиглан саяны коммитоо пушлэнэ (`your-branch-name` гэснийг үүсгэсэн бранчийнхаа нэрээр солихоо мартуузай):
+
+```bash
+git push -u origin your-branch-name
+```
+
+ Пушлэх үйлдэл дээр ямар нэгэн алдаа заавал энд дарж харах:
+
+- ### Нэвтрэх эрхийн алдаа
+ remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead.
+ remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information.
+ fatal: Authentication failed for 'https://github.com/
+ Хэрэв дээрх янзаар алдаа зааж байвал шинэ SSH түлхүүр үүсгэн хаягтайгаа холбох хэрэгтэй гэсэн үг бөгөөд хэрхэн холбохыг [энд дарж харна уу](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account).
+
+ Мөн, аль рэпотой холбогдсон байгаагаа 'git remote -v' үйлдлээр шалгачихад гэмгүй.
+
+ Хэрэв дээрх үйлдлийн хариу доорх маягаар байвал:
+ origin https://github.com/таны-хэрэглэгчийн-нэр/таны-рэпо-нэр.git (fetch)
+ origin https://github.com/таны-хэрэглэгчийн-нэр/таны-рэпо-нэр.git (push)
+
+ дараах үйлдлээр өөрчлөх хэрэгтэй:
+ ```bash
+ git remote set-url origin git@github.com:таны-хэрэглэгчийн-нэр/таны-рэпо-нэр.git
+ ```
+ Ингэснээр та нууц үгээр биш хаягтай чинь холбогдсон SSH түлхүүрээр нэвтэрч эхэлнэ.
+
+
+Дараа нь нэгтгэх хүсэлтээ илгээнэ.
+
+
+
+Таны хүсэлтийг бид хүлээн аваад автоматаар код бааздаа нэгтгэсэн байх болно. Энэ талаар бүртгэлтэй и-мейл хаяг дээр чинь мэдэгдэл ирнэ.
+
+## Одоо яг яах билээ?
+
+Нээлттэй эх код баазад өөрийн нэмрээ оруулахын тулд ерөнхийд нь мөрдөх ёстой _fork -> clone -> edit -> pull request_ гэсэн дарааллыг та одоо мэддэг боллоо.
+
+Нээлттэй эхэд нэмэр оруулж эхлэх анхны алхамаа хийсэн талаараа [энд дарж](https://firstcontributions.github.io/#social-share) нөхөдтэйгөө хуваалцана уу.
+
+Өшөө дасгал ажиллахын тулд [энд дар](https://github.com/roshanjossey/code-contributions).
+
+Нээлттэй эх код баазтай янз бүрийн төслүүдийн жагсаалтыг [энд дарж харна уу](https://firstcontributions.github.io/#project-list).
+
+### [Нэмэлт материал](docs/additional-material/git_workflow_scenarios/additional-material.md)
+
+## Өөр програмууд ашигласан хичээлүүд
+
+| |
|
|
| |
|
+| ----------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| [GitHub Desktop](docs/gui-tool-tutorials/github-desktop-tutorial.md) | [Visual Studio 2017](docs/gui-tool-tutorials/github-windows-vs2017-tutorial.md) | [GitKraken](docs/gui-tool-tutorials/gitkraken-tutorial.md) | [Visual Studio Code](docs/gui-tool-tutorials/github-windows-vs-code-tutorial.md) | [Atlassian Sourcetree](docs/gui-tool-tutorials/sourcetree-macos-tutorial.md) | [IntelliJ IDEA](docs/gui-tool-tutorials/github-windows-intellij-tutorial.md) |
+
+
+
+
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
diff --git a/docs/translations/README.pb.md b/docs/translations/README.pb.md
index d53d6107..43d093d1 100644
--- a/docs/translations/README.pb.md
+++ b/docs/translations/README.pb.md
@@ -1,5 +1,4 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
# ਪਹਿਲਾ ਯੋਗਦਾਨ
@@ -104,7 +103,7 @@ git push origin
+
+
+
+
+
+
+
+
+
+
-که د کمانډ لاین سره راحت نه یاست [ کولای شی تصویر بڼه دلته پرمخ یوسئ](https://github.com/firstcontributions/first-contributions#tutorials-using-other-tools)
+---
-که چېرې مو git نه وي انسټال کړی [له دغه ځایه یې درښکته او انسټال یې کړئ](https://help.github.com/articles/set-up-git/)
+## لومړی ګډون
-
-###
+
+## دا ذخیره (repository) کلون کړئ
-###
-
-```git
-git clone https://github.com/MasihKarimi/first-contributions.git
-```
-
- که چېرې په دې لړ کې د کومې ستونزې سره مخ شوئ دا ځاې کېکاږئ
+که چېرې په دې لړ کې د کومې ستونزې سره مخ شوئ دا ځای کېکاږئ
-- ### د تصدیق کولو تېروتنه
- remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead.
- remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information.
- fatal: Authentication failed for 'https://github.com/
- [په دې کیټ هب ښونه کې زده کړئ چې څنګه پورته ستونزه حل کړئ](https://docs.github.com/en/authentication/connecting-to-github-with-ssh/adding-a-new-ssh-key-to-your-github-account)
+که چېرته ستاسې ستونزه داسي وي.
+
+
+remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead.
+remote: Please see https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/ for more information.
+fatal: Authentication failed for 'https://github.com/<your-username>/first-contributions.git/
+
+
-
- |
|
|
| |
|
| ----------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [GitHub Desktop](gui-tool-tutorials/github-desktop-tutorial.md) | [Visual Studio 2017](gui-tool-tutorials/github-windows-vs2017-tutorial.md) | [GitKraken](gui-tool-tutorials/gitkraken-tutorial.md) | [Visual Studio Code](gui-tool-tutorials/github-windows-vs-code-tutorial.md) | [Atlassian Sourcetree](gui-tool-tutorials/sourcetree-macos-tutorial.md) | [IntelliJ IDEA](gui-tool-tutorials/github-windows-intellij-tutorial.md) |
\ No newline at end of file
+| [GitHub Desktop](gui-tool-tutorials/github-desktop-tutorial.md) | [Visual Studio 2017](gui-tool-tutorials/github-windows-vs2017-tutorial.md) | [GitKraken](gui-tool-tutorials/gitkraken-tutorial.md) | [Visual Studio Code](gui-tool-tutorials/github-windows-vs-code-tutorial.md) | [Atlassian Sourcetree](gui-tool-tutorials/sourcetree-macos-tutorial.md) | [IntelliJ IDEA](gui-tool-tutorials/github-windows-intellij-tutorial.md) |
+
+
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -111,7 +110,7 @@ Parabéns! Você completou o fluxo de trabalho básico _fork -> clone -> edit ->
Celebre sua contribuição e compartilhe com seus amigos e seguidores no [app web](https://firstcontributions.github.io/#social-share).
-Você também pode se juntar à nossa equipe no _Slack_ caso precise de alguma ajuda ou tenha alguma dúvida. [Junte-se à nossa equipe no Slack](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
+Se você quiser mais prática, verifique [code contributions](https://github.com/roshanjossey/code-contributions).
Agora você pode colaborar com outros projetos. Nós compilamos uma lista de projetos com problemas simples que você pode começar. Verifique em [a lista de projetos no web app](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.pus.md b/docs/translations/README.pus.md
deleted file mode 100644
index d8b8e6bd..00000000
--- a/docs/translations/README.pus.md
+++ /dev/null
@@ -1,107 +0,0 @@
-[](https://github.com/firstcontributions/open-source-badges)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-vchl8cde-S0KstI_jyCcGEEj7rSTQiA)
-[](https://opensource.org/licenses/MIT)
-[](https://www.codetriage.com/roshanjossey/first-contributions)
-
-
-
-#### که تاسو git نصب نلرئ [له دې ځایه نصب کړئ](https://help.github.com/articles/set-up-git/).
-
-## د دې ریپوزیتوری فورک کړئ
-د دې پاڼې په سر کې د Fork تڼۍ په کلیک کولو سره دا ذخیره فورک کړئ.
-دا به ستاسو په حساب کې د دې ذخیره کاپي رامینځته کړي.
-
-## فورک شوی ریپازیتوری کلون Clone کړئ
-
-
-
-اوس خپل ماشین ته د فورک شوي ذخیره کلون کړئ. خپل GitHub حساب ته لاړ شئ، د فورک شوي ریپازیتوری خلاص کړئ، د Code تڼۍ باندې کلیک وکړئ او بیا د کلپ بورډ ته د Copy To Clipboard باندې کلیک وکړئ.
-
-بیا یو ټرمینل خلاص کړئ او لاندې کمانډ چل کړئ:
-```
-git clone "url you just copied"
-```
-چیرته چې "url you just copied" (پرته د نرخ نښه) د دې ریپازیتوری url دی (ستاسو د دې پروژې فورک). د url ترلاسه کولو لپاره مخکیني ګامونه وګورئ.
-
-
-
-د مثال په توګه:
-```
-git clone https://github.com/this-is-you/first-contributions.git
-```
-چیرته چې 'this-is-you' ستاسو د GitHub کاربری نوم دی. دلته تاسو خپل کمپیوټر ته په GitHub کې د لومړۍ مرستې ذخیره مینځپانګې کاپي کوئ.
-
-### یوه څانګه جوړه کړئ
-په خپل کمپیوټر کې د ریپوزیتوری لارښود ته بدل کړئ (که تاسو دمخه نه لرئ):
-```
-cd first-contributions
-```
-اوس د `git switch` کمانډ په کارولو سره څانګه جوړه کړئ:
-```
-git checkout -b your-new-branch-name
-```
-د مثال په توګه:
-```
-git checkout -b add-alonzo-church
-```
-
-### اړین بدلونونه وکړئ او دا بدلونونه Commit کړئ
-اوس د `Contributors.md` فایل په متن ایډیټر کې خلاص کړئ، خپل نوم پکې اضافه کړئ. دا د فایل په پیل یا پای کې مه اضافه کړئ. په منځ کې هر ځای کېږدئ. اوس، فایل ذخیره کړئ.
-
-
-
-که تاسو د پروژې موقعیت ته لاړ شئ او د `git status` کمانډ اجرا کړئ ، نو تاسو به وګورئ چې بدلونونه شتون لري.
-
-د `git add` کمانډ په کارولو سره دا بدلونونه په هغه څانګه کې اضافه کړئ چې تاسو یې رامینځته کړی:
-```
-git add Contributors.md
-```
-
-اوس دا بدلونونه د `git commit` کمانډ په کارولو سره ترسره کړئ:
-```
-git commit -m "Add
-
-اوس د پلولو غوښتنه (Pull Request) وسپارئ.
-
-
-
-ډیر ژر به زه ستاسو ټول بدلونونه د دې پروژې په اصلي څانګه کې یوځای کړم. تاسو به د خبرتیا بریښنالیک ترلاسه کړئ کله چې بدلونونه یوځای شي.
-
-## راتلونکی څه شی دی
-مبارک شه! تاسو یوازې د معیاري فورک(Fork)، کلون(Clone)، ایډیټ(Edit)، او پلولو غوښتنې (Pull Request) کاري فلو بشپړ کړی چې تاسو به ډیری وختونه د مرسته کونکي په توګه ورسره مخ شئ!
-
-خپله ونډه ولمانځئ او له خپلو ملګرو او پیروانو سره یې شریک کړئ [دلته](https://firstcontributions.github.io/#social-share) لاړ شئ.
-
-همدارنګه، تاسو کولی شئ زموږ د Slack ټیم سره یوځای شئ که تاسو کومې مرستې ته اړتیا لرئ یا کومه پوښتنه لرئ. [دلته کلیک وکړی](https://join.slack.com/t/firstcontributors/shared_invite/zt-vchl8cde-S0KstI_jyCcGEEj7rSTQiA)
-
-اوس راځئ چې تاسو په نورو پروژو کې د مرستې سره پیل وکړو. موږ د اسانه مسلو سره د پروژو لیست ترتیب کړی چې تاسو یې پیل کولی شئ. [بشپړ ی وګوره](https://firstcontributions.github.io/#project-list)
-
-### [نور معلومات](additional-material/git_workflow_scenarios/additional-material.md)
-
-## د-نورو-وسیلو-کارولو-لارښوونې
-| |
|
|
| |
|
-| ----------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [GitHub Desktop](gui-tool-tutorials/github-desktop-tutorial.md) | [Visual Studio 2017](gui-tool-tutorials/github-windows-vs2017-tutorial.md) | [GitKraken](gui-tool-tutorials/gitkraken-tutorial.md) | [Visual Studio Code](gui-tool-tutorials/github-windows-vs-code-tutorial.md) | [Atlassian Sourcetree](gui-tool-tutorials/sourcetree-macos-tutorial.md) | [IntelliJ IDEA](gui-tool-tutorials/github-windows-intellij-tutorial.md) |
-| | | | | | |
-](https://github.com/facebook/react/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+bug%22) | [](https://github.com/habitat-sh/habitat/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [](https://github.com/scikit-learn/scikit-learn/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [
](https://github.com/technomancy/leiningen/issues?q=is%3Aopen+is%3Aissue+label%3ANewbie) | [
](https://github.com/numpy/numpy/issues?q=is%3Aopen+is%3Aissue+label%3A%22Easy+Fix%22) | [](https://github.com/elastic/elasticsearch/issues?q=is%3Aopen+is%3Aissue+label%3A%22low+hanging+fruit%22) |
+| [](https://github.com/exercism/exercism.io/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+patch%22) | [](https://github.com/funretro/distributed/issues?q=is%3Aopen+is%3Aissue+label%3Abeginner-friendly) | [](https://github.com/facebook/react/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+bug%22) | [](https://github.com/habitat-sh/habitat/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [](https://github.com/scikit-learn/scikit-learn/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [
](https://github.com/technomancy/leiningen/issues?q=is%3Aopen+is%3Aissue+label%3ANewbie)(https://github.com/technomancy/leiningen/issues?q=is%3Aopen+is%3Aissue+label%3ANewbie) | [
](https://github.com/numpy/numpy/issues?q=is%3Aopen+is%3Aissue+label%3A%22Easy+Fix%22) | [](https://github.com/elastic/elasticsearch/issues?q=is%3Aopen+is%3Aissue+label%3A%22low+hanging+fruit%22) |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| [exercism](https://github.com/exercism/exercism.io/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+patch%22) | [Fun Retros](https://github.com/funretro/distributed/issues?q=is%3Aopen+is%3Aissue+label%3Abeginner-friendly) | [react](https://github.com/facebook/react/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+bug%22) | [habitat](https://github.com/habitat-sh/habitat/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [scikit-learn](https://github.com/scikit-learn/scikit-learn/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [Leiningen](https://github.com/technomancy/leiningen/issues?q=is%3Aopen+is%3Aissue+label%3ANewbie) | [numpy](https://github.com/numpy/numpy/issues?q=is%3Aopen+is%3Aissue+label%3A%22Easy+Fix%22) | [elasticsearch](https://github.com/elastic/elasticsearch/issues?q=is%3Aopen+is%3Aissue+label%3A%22low+hanging+fruit%22) |
| [](https://github.com/Homebrew/brew/issues?q=is%3Aopen+is%3Aissue+label%3A%22help+wanted%22) | [](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3AE-easy) | [](https://github.com/vuejs/vue/issues?q=is%3Aopen+is%3Aissue+label%3A%22contribution+welcome%22) | [](https://github.com/SuaveIO/suave/issues?q=is%3Aopen+is%3Aissue+label%3Ahardness-easy) | [](https://github.com/OpenRA/OpenRA/issues?q=is%3Aopen+is%3Aissue+label%3AEasy) | [](https://github.com/powershell/powershell/issues?q=is%3Aopen+is%3Aissue+label%3AUp-for-Grabs) | [](https://github.com/coala/coala/issues?q=is%3Aopen+is%3Aissue+label%3Adifficulty%2Flow+label%3Adifficulty%2Fnewcomer) | [](https://github.com/moment/moment/issues?q=is%3Aopen+is%3Aissue+label%3AUp-For-Grabs) |
diff --git a/docs/translations/README.ta.md b/docs/translations/README.ta.md
index edff6820..95b2919c 100644
--- a/docs/translations/README.ta.md
+++ b/docs/translations/README.ta.md
@@ -1,5 +1,4 @@
[](https://github.com/firstcontributions/open-source-badges)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -78,7 +77,7 @@ git checkout -b உங்கள்-கிளையின்-பெயர்
## தேவையான மாற்றங்களைச் செய்து அந்த மாற்றங்களை commit செய்யுங்கள்
-இப்போது *text editor* அல்லது *notepad* இல் `Contribitors.md` கோப்பைத் திறந்து, அதில் உங்கள் பெயரைச் சேர்க்கவும். கோப்பின் தொடக்கத்திலோ அல்லது முடிவிலோ இதைச் சேர்க்க வேண்டாம். இடையில் எங்கும் வைக்கவும். இப்போது, கோப்பை சேமிக்கவும்.
+இப்போது *text editor* அல்லது *notepad* இல் `Contributors.md` கோப்பைத் திறந்து, அதில் உங்கள் பெயரைச் சேர்க்கவும். கோப்பின் தொடக்கத்திலோ அல்லது முடிவிலோ இதைச் சேர்க்க வேண்டாம். இடையில் எங்கும் வைக்கவும். இப்போது, கோப்பை சேமிக்கவும்.
@@ -141,7 +140,7 @@ GitHub இல் உள்ள உங்கள் களஞ்சியத்த
உங்கள் பங்களிப்பைக் கொண்டாடுங்கள் மற்றும் உங்கள் நண்பர்கள் மற்றும் பின்தொடர்பவர்களுடன் [web app](https://firstcontributions.github.io/#social-share) சென்று பகிர்ந்து கொள்ளுங்கள்.
-உங்களுக்கு ஏதேனும் உதவி தேவைப்பட்டால் அல்லது ஏதேனும் கேள்விகள் இருந்தால் எங்கள் slack team இல் இணையலாம். [Join our slack crew](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)..
+உங்களுக்கு மேலும் பயிற்சி தேவைப்பட்டால், [code contributions](https://github.com/roshanjossey/code-contributions) என்னும் செயலை சரிபார்க்கலாம்.
இப்போது மற்ற திட்டங்களுக்கு பங்களிப்பதன் மூலம் தொடங்குவோம். நீங்கள் தொடங்கக்கூடிய எளிதான சிக்கல்களுடன் திட்டங்களின் பட்டியலை நாங்கள் தொகுத்துள்ளோம். பாருங்கள் [the list of projects in the web app](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.te.md b/docs/translations/README.te.md
index 1b62c438..7996d2a0 100644
--- a/docs/translations/README.te.md
+++ b/docs/translations/README.te.md
@@ -1,38 +1,26 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
# ఓపెన్సోర్స్కు మీ మొదటి సహకారం
-వ్యాసాలు చదవడం & చూడటం ట్యుటోరియల్స్ సహాయపడతాయి, కానీ వాస్తవంగా ఆచరణాత్మక వాతావరణంలో నేర్పిస్తున్నదాని కంటే మెరుగైనది ఏమిటి?
+ఇది కష్టం. మీరు ఏదైనా మొదటిసారి చేస్తున్నప్పుడు, ముఖ్యంగా ఇతరులతో కలిసి పని చేస్తున్నప్పుడు, తప్పులు చేయడం సౌకర్యంగా ఉండదు. కానీ ఓపెన్ సోర్స్ అంటే సహకారం మరియు కలిసి పనిచేయడం. మొదటిసారి ఓపెన్ సోర్స్ కంట్రిబ్యూటర్లు నేర్చుకోవాలని మరియు కంట్రిబ్యూట్ చేయాలని అనుకునే విధానాన్ని సరళం చేయాలని మేము అనుకుంటున్నాము.
-మార్గదర్శిని అందించడం మరియు ఈ ప్రాజెక్ట్ ప్రారంభకులకు వారి మొదటి ఓపెన్ సోర్స్ సహకారం అందించే విధానాన్ని సరళీకరించడం మరియు మార్గనిర్దేశం చేయడం లక్ష్యంగా పెట్టుకుంది. మీరు మీ మొదటి ఓపెన్ సోర్స్స హకారం అందించాలని చూస్తున్నట్లయితే, దిగువ దశలను అనుసరించండి.
+వ్యాసాలు చదవడం మరియు ట్యుటోరియల్స్ చూడటం సహాయపడవచ్చు, కానీ వాస్తవంగా ఆచరణాత్మక వాతావరణంలో చేయడం కంటే మెరుగైనది ఏముంది? ఈ ప్రాజెక్ట్ యొక్క లక్ష్యం ప్రారంభకులకు మార్గదర్శకత్వం మరియు వారి మొదటి కంట్రిబ్యూషన్ చేసే విధానాన్ని సరళీకరించడం. మీరు మీ మొదటి కంట్రిబ్యూషన్ చేయాలని చూస్తున్నట్లయితే, దిగువ దశలను అనుసరించండి.
-
-#### *మీకు ఆదేశ పంక్తితో సౌకర్యంగా లేకపోతే, [ఇక్కడ GUI సాధనాలను ఉపయోగించి ట్యుటోరియల్స్ ఉన్నాయి.](#ఇతర-సాధనాలను-ఉపయోగించి-ట్యుటోరియల్స్)*
-
-
-
-
-
-మొదటిసారి ఓపెన్ సోర్స్ కొరకు సహకరించాలి అనుకునే ప్రారంభకులకు పద్దతులను సులభతరం చేయడం ఈ ప్రాజెక్ట్ **ముఖ్య ఉద్దేశం**
-
- మీరు మొదటిసారి ఒపెన్ సోర్స్ ప్రాజెక్ట్ లకొరకు కాంట్రిబ్యూట్ చేయాలి అనుకుంటే కింది సూచనలు పాటించండి.
-
-మీరు `గిట్(git)`వర్షన్ కట్రోల్ సిస్టమ్ తో సౌకర్యవంతంగా లేకపోతే [ఇక్కడ GUI సాధనాలను ఉపయోగించి ట్యుటోరియల్స్ ఉన్నాయి.](#ఇతర-సాధనాలను-ఉపయోగించి-ట్యుటోరియల్స్)*
+#### *మీకు కమాండ్ లైన్తో సౌకర్యంగా లేకపోతే, [ఇక్కడ GUI సాధనాలను ఉపయోగించి ట్యుటోరియల్స్ ఉన్నాయి.](#ఇతర-సాధనాలను-ఉపయోగించి-ట్యుటోరియల్స్)*
-మీ కంప్యూటర్ లో `GIT` లేకపోతే, [గిట్ వర్షన్ కంట్రోల్ సిస్టమ్ ను ఇన్స్టాల్ చేయండి](https://help.github.com/articles/set-up-git/).
+#### మీ కంప్యూటర్లో git లేకపోతే, [దాన్ని ఇన్స్టాల్ చేయండి](https://docs.github.com/en/get-started/quickstart/set-up-git).
-## ఈ రిపోజిటరీని ఫోర్క్ చెయ్యండి
+## ఈ రిపోజిటరీని ఫోర్క్ చేయండి
-ఈ రిపోజిటరీని ఫోర్క్ చెయ్యండి ఈ పేజీ ఎగువ భాగంలో ఫోర్క్ బటన్ పై క్లిక్ చేయడం ద్వారా క్లిక్ చేయండి.
+ఈ రిపోజిటరీని ఫోర్క్ చేయండి ఈ పేజీ ఎగువ భాగంలో ఫోర్క్ బటన్పై క్లిక్ చేయడం ద్వారా.
ఇది మీ ఖాతాలో ఈ రిపోజిటరీ కాపీని సృష్టిస్తుంది.
-## ఈ రిపోజిటరీని క్లోన్ చెయ్యండి
+## రిపోజిటరీని క్లోన్ చేయండి
diff --git a/docs/translations/README.tm.md b/docs/translations/README.tm.md
index 66af2dbd..1014cc88 100644
--- a/docs/translations/README.tm.md
+++ b/docs/translations/README.tm.md
@@ -1,18 +1,15 @@
[](https://github.com/firstcontributions/open-source-badges)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
-#### _[Başka dillerde](translations/Translations.md) okamak._
-
-[](translations/README.al.md)[
](translations/README.uz.md)[
](translations/README.aze.md)[
](translations/README.bn.md)[
](translations/README.bg.md)[
](translations/README.pt_br.md)[
](translations/README.ca.md)[](translations/README.zh-cn.md)[
](translations/README.cs.md)[
](translations/README.de.md)[
](translations/README.da.md)[
](translations/README.eg.md)[
](translations/README.es.md)[
](translations/README.fr.md)[
](translations/README.gl.md)[](translations/README.gr.md)[
](translations/README.ge.md)[
](translations/README.hu.md)[
](translations/README.id.md)[
](translations/README.hb.md)[
](translations/Translations.md)[
](translations/README.ta.md)[
](translations/README.fa.md)[
](translations/README.pus.md)[
](translations/README.it.md)[
](translations/README.ja.md)[
](translations/README.si.md)[
](translations/README.kws.md)[
](translations/README.ko.md)[
](translations/README.lt.md)[
](translations/README.ro.md)[
](translations/README.mm_unicode.md)[
](translations/README.mk.md)[
](translations/README.mx.md)[
](translations/README.my.md)[
](translations/README.nl.md)[
](translations/README.no.md)[
](translations/README.np.md)[
](translations/README.tl.md)[
](translations/README.en-pirate.md)[](translations/README.ur.md)[
](translations/README.pl.md)[
](translations/README.pt-pt.md)[
](translations/README.ru.md)[
](translations/README.ar.md)[
](translations/README.se.md)[
](translations/README.slk.md)[
](translations/README.sl.md)[
](translations/README.th.md)[
](translations/README.tr.md)[
](translations/README.zh-tw.md)[
](translations/README.ua.md)[
](translations/README.vn.md)[
](translations/README.zul.md)[
](translations/README.afk.md)[
](translations/README.igb.md)[
](translations/README.yor.md)[
](translations/README.hau.md)[
](translations/README.lv.md)[
](translations/README.fi.md)[
](translations/README.by.md)[
](translations/README.sr.md)[
](translations/README.kz.md)[
](translations/README.bih.md)[
](translations/README.bih.md)[
](translations/README.hr.md)[
](translations/README.ps.md)[
](translations/README.so.md)[
](translations/README.tm.md)
# Ilkinji goşantlar
-Bu proýektiň maksady githuby täze öwrenijilere nädip ilkinji goşantlaryny(contribution) goşup biljeklerini görkezmekdir.
+Bu proýektiň maksady, GitHub-y täze öwrenýänlere ilkinji goşantlaryny (contribution) nädip goşup biljeklerini görkezmekdir.
-Kyn bolup biler. Täze bir işi ilkinji sapar etmek hemişe kyn bolup biler. Hem-de başka kişiler bilen bilelikde işleşmeli bolsa, ýalňyşlyk etmäne çekinýäň, gorkýaň. Ýöne açyk çeşmäniň(open source) düýbünde başka kişiler bilen bilelikde işleşmek ýatýar. Biz açyk çeşme(open source) proýektlerine ilkinji sapar goşant goşjaklara ýol görkezip, ilkinji goşantlaryny goşmagyny aňsatlaşdyrmak isleýäs.
+Kyn bolup biler. Täze bir işi ilkinji sapar etmek hemişe kyn bolýar. Başga kişiler bilen bilelikde işlemeli bolsaň, ýalňyşlyk etmäne çekinýäň we gorkýaň. Ýöne açyk çeşmäniň (open source) düýbünde başga adamlar bilen bilelikde işleşmek ýatýar. Biz açyk çeşme (open source) proýektlerine ilkinji sapar goşant goşjaklara ýol görkezip, olaryň ilkinji goşantlaryny has aňsatlaşdyrmak isleýäris.
+
+Blog postlary okamak ýa-da wideolary görüp öwrenmek kömek edip biler, ýöne bir zady edip öwrenmegiň ýerini tutup biljek zat ýok, şeýle dälmi? Eger ilkinji goşandyňyzy goşmak isleýän bolsaňyz, aşakdaky görkezmeleri yzarlaň.
-Blog post okamak ýa-da wideolardan öwrenmek kömek edip biler, ýöne bir zady edip öwrenmegiň ýerini tutup biljek zat ýok, şeýle dälmi? Ilkinji goşandyňy goşmak isleýän bolsaň, aşakdaky görkezilenleri yzarlap bilersiň.
@@ -73,7 +70,7 @@ git switch -c goş-ahmet-ahmedow
## Gerekli üýtgeşmeleri edip, ol üýtgeşmeleri bellige almak (commit etmek).
-Indi, tekst redaktorynda(m.ü VSCode) `Contributors.md` faylyny açyň, içinde iň soňunda adyňyzy giriziň we ýatda saklaň(save)
+Indi, tekst redaktorynda(m.ü VSCode) `Contributors.md` faýlyny açyň, içinde iň soňunda adyňyzy giriziň we ýatda saklaň(save)
```
- [Adyňyz](https://github.com/ulanyjy-adyňyz)
diff --git a/docs/translations/README.tr.md b/docs/translations/README.tr.md
index 815dd1fc..6f7668bd 100644
--- a/docs/translations/README.tr.md
+++ b/docs/translations/README.tr.md
@@ -5,7 +5,7 @@
# İlk katkı
-Zor gelir... Herhangi bir işi ilk kez yapmak daima zor gelir. Özellikle başkalarıyla ortak çalışıyorsanız, hata yapmak içinize sinmez. Ancak "Açık Kaynakın" temelinde işbirliği ve birlikte çalışma yatmakta. Biz, açık kaynak projelere ilk kez katkıda bulunacak kişilerin bu süreci öğrenmesini ve ilk katkılarını sunmalarını kolaylaştırmayı istiyoruz.
+Zor gelir... Herhangi bir işi ilk kez yapmak daima zor gelir. Özellikle başkalarıyla ortak çalışıyorsanız, hata yapmak içinize sinmez. Ancak "Açık Kaynağın" temelinde işbirliği ve birlikte çalışma yatmakta. Biz, açık kaynak projelere ilk kez katkıda bulunacak kişilerin bu süreci öğrenmesini ve ilk katkılarını sunmalarını kolaylaştırmayı istiyoruz.
Makale okumak ve eğitim videoları izlemek yardımcı olabilir, fakat bir işi gerçekten yapmanın yerini ne tutabilir ki? Bu proje yeni başlayanların veya ilk defa katkıda bulunacakların işini kolaylaştırmak ve onlara rehberlik etmek amacındadır. Unutmayın ki ne kadar rahat olursanız o kadar rahat öğrenirsiniz. Eğer bir GitHub projesine ilk defa katkıda bulunacaksanız, aşağıda gösterilen basit adımları takip etmeniz yeterli olacaktır. Söz veriyoruz, eğlenceli olacak.
@@ -13,7 +13,7 @@ Makale okumak ve eğitim videoları izlemek yardımcı olabilir, fakat bir işi
Eğer bilgisayarınızda git kurulu değil ise, [ yükleyin ]( https://help.github.com/articles/set-up-git/ ).
-## Projeyi "çatallama"
+## Projeyi "forklama"
Sayfanın sağ üst köşesinde bulunan "Fork" butonuna basıp bu projeyi çatallayın.
Bu işlem sizin hesabınız altında projenin bir kopyasını oluşturacaktır.
diff --git a/docs/translations/README.ua.md b/docs/translations/README.ua.md
index 521bda0f..4011a3ad 100644
--- a/docs/translations/README.ua.md
+++ b/docs/translations/README.ua.md
@@ -1,5 +1,4 @@
[](https://github.com/firstcontributions/open-source-badges)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -118,8 +117,6 @@ git push -г origin
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -128,8 +127,10 @@ Tabriklayman! Siz horizgina contributor sifatida tez-tez uchraydigan standard is
Hissangizni nishonlang va [web app](https://firstcontributions.github.io/#social-share)ga o'tish orqali do'stlaringizga va ergashuvchilaringizga ulashing.
+Agar koʻproq mashq qilishni istasangiz, [kod hissalarini](https://github.com/roshanjossey/code-contributions) tekshiring.
+
+
-Agar sizga yordam kerak bo'lsa yoki savollaringiz bo'lsa, bizning slack jamoamizga qo'shilishingiz mumkin.[Slack jamoasiga qo'shiling](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
Endi boshqa proyektlarga hissa qo‘shishni boshlaylik. Siz boshlashingiz mumkin bo'lgan oson masalalar bilan proyektlar ro'yxatini tuzdik. Ko'zdan kechiring [web appdagi proyektlar ro'yxati](https://firstcontributions.github.io/#project-list).
diff --git a/docs/translations/README.vn.md b/docs/translations/README.vn.md
index 4bf453ee..bc031320 100644
--- a/docs/translations/README.vn.md
+++ b/docs/translations/README.vn.md
@@ -1,5 +1,4 @@
[](https://github.com/ellerbrock/open-source-badges/)
-[
](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA)
[](https://opensource.org/licenses/MIT)
[](https://www.codetriage.com/roshanjossey/first-contributions)
@@ -116,8 +115,6 @@ Chúc mừng! Bạn vừa hoàn thành quy trình tiêu chuẩn copy (fork) -> S
Hãy ăn mừng đóng góp của bạn, và chia sẻ nó với bạn bè và những người theo dõi của bạn bằng cách truy cập [ứng dụng web](https://roshanjossey.github.io/first-contribution/#social-share).
-Bạn có thể tham gia Slack của chúng tôi trong trường hợp bạn cần trợ giúp hoặc có câu hỏi nào. [Tham gia Slack](https://join.slack.com/t/firstcontributors/shared_invite/zt-1hg51qkgm-Xc7HxhsiPYNN3ofX2_I8FA).
-
Để hỗ trợ bạn với việc đóng góp cho các dự án (project) khác, chúng tôi đã tổng hợp một danh sách các dự án có các vấn đề đơn giản mà bạn có thể bắt đầu. Hãy kiểm tra [danh sách dự án trong ứng dụng web](https://firstcontributions.github.io/#project-list).
### [Tài liệu bổ sung](../additional-material/git_workflow_scenarios/additional-material.md)
diff --git a/docs/translations/README.zh-cn.md b/docs/translations/README.zh-cn.md
index 7e7b2e3e..56f271bb 100644
--- a/docs/translations/README.zh-cn.md
+++ b/docs/translations/README.zh-cn.md
@@ -114,9 +114,7 @@ git push origin <分支的名称>
为你的第一次贡献庆祝吧,不要忘记和你的朋友以及你的小迷弟小迷妹们分享我们的[网站](https://roshanjossey.github.io/first-contributions/#social-share)哟!
-
-
-还在等什么,马上加入到其他项目的开发中去吧!为了方便你快速上手,我们收集了当前流行的众多代码仓库中,适合初学者解决的[问题列表](https://firstcontributions.github.io/#project-list)。
+如果您想更多练习,请查看 [code contributions](https://github.com/roshanjossey/code-contributions)。
### [附加材料](additional-material/git_workflow_scenarios/additional-material.md)
diff --git a/docs/translations/README.zh-tw.md b/docs/translations/README.zh-tw.md
index 5c5f5b14..cebdf526 100644
--- a/docs/translations/README.zh-tw.md
+++ b/docs/translations/README.zh-tw.md
@@ -86,7 +86,7 @@ git push origin 如果在 push(發佈)过程中出 error(錯誤),點擊這裡
+ 如果在 push(發佈)過程中出 error(錯誤),點擊這裡
- ### Authentication Error
remote: Support for password authentication was removed on August 13, 2021. Please use a personal access token instead.
diff --git a/docs/translations/Translations.md b/docs/translations/Translations.md
index c1677c65..393ab89a 100644
--- a/docs/translations/Translations.md
+++ b/docs/translations/Translations.md
@@ -81,4 +81,5 @@
|
| [Türkmençe](README.tm.md) |
|
| [հայերեն](README.arm.md) |
|
| [አማርኛ ቋንቋ](translations/README.et.md) |
+|
| [Монгол хэл](README.mn.md) |
|
| Kurdî |
diff --git a/docs/translations/gujarati/gujarati.md b/docs/translations/gujarati/gujarati.md
deleted file mode 100644
index 02a9a763..00000000
--- a/docs/translations/gujarati/gujarati.md
+++ /dev/null
@@ -1,63 +0,0 @@
-Here’s a normalized version of the text without GitHub command examples:
-
----
-
-# પ્રથમ યોગદાન
-
-આ પ્રોજેક્ટનો ઉદ્દેશ નવા સ્રોતકર્તાઓને તેમની પ્રથમ યોગદાન આપવાની પદ્ધતિને સરળ બનાવવાનો અને માર્ગદર્શન આપવાનો છે. જો તમે તમારી પ્રથમ યોગદાન આપવા માગો છો, તો નીચેના પગલાંઓને અનુસરો.
-
-#### *જો તમે કમાન્ડ લાઈન સાથે નવા છો, તો અન્ય સાધનોના ઉપયોગ માટે ટ્યુટોરીયલ પર જાઓ.*
-
-જો તમારા કમ્પ્યુટરમાં Git સ્થાપિત ન હોય, તો તેને સ્થાપિત કરવા માટેની માર્ગદર્શિકા જોવા માટે લિંક્પ્રदान કરો.
-
-## આ રિપોઝિટરીનો "ફોર્ક" કરો
-
-પૃષ્ઠના જમણાંમાં "ફોર્ક" બટન પર ક્લિક કરો. તે કરવાથી, આ રિપોઝિટરીની એક નકલ તમારા GitHub એકાઉન્ટમાં બનાવાઈ છે.
-
-## કોપી કરેલા રિપોઝિટરીનો "ક્લોન" કરો
-
-હવે, તમે જે રિપોઝિટરીનો ફોર્ક કર્યો છે, તે ક્લોન બનાવો.
-
-તમારા ટર્મિનલને ખોલો અને આડેધોરને અનુસરો.
-
-## એક શાખા બનાવો
-
-તમારા કમ્પ્યુટરમાં રિપોઝિટરીના ડિરેક્ટરીમાં જાઓ. હવે શાખા બનાવો.
-
-## જરૂરી ફેરફાર કરો અને તે ફેરફારોનો "કમિટ" કરો
-
-ફાઇલને ટેક્સ્ટ એડિટરમાં ખોલો અને તમારું નામ ઉમેરો. ફાઇલને સાચવો.
-
-જો તમે પ્રોજેક્ટના ડિરેક્ટરીમાં જાઓ, તો તમે ફેરફારો જોઈ શકશો. ફાઇલને તેમાં ઉમેરો.
-
-હવે આ ફેરફારોને કમિટ કરો.
-
-## GitHub પર તમારાં ફેરફારોનો "પુષ" કરો
-
-તમારા ફેરફારોને મોકલવા માટેનું પગલું પૂર્ણ કરો.
-
-## તમારા ફેરફારોને સમીક્ષ માટે મોકલો
-
-જો તમે તમારા GitHub પરના રિપોઝિટરીમાં જાઓ, તો તમને બટન દેખાશે. આ બટન પર ક્લિક કરો.
-
-હવે *પુલ રિક્વેસ્ટ* મોકલો.
-
-જલદી જ હું તમારા ફેરફારોને આ પ્રોજેક્ટની માસ્ટર શાખામાં જોડવા જઇ રહ્યો છું. જ્યારે ફેરફારો જોડાશે ત્યારે તમને સૂચના મળશે.
-
-## આગામી પગલાં શું છે?
-
-અભિનંદન! તમે યોગદાન આપવાની પ્રક્રિયા પૂરી કરી છે.
-
-તમારા યોગદાનનો ઉત્સવ મનાવો અને તેને શેર કરો.
-
-જો તમને મદદની જરૂર હોય કે તમારી પાસે કોઈ પ્રશ્ન હોય, તો તમારે જોડાવા માટેનાં વિકલ્પો ઉપલબ્ધ છે.
-
-હવે બીજા પ્રોજેક્ટમાં યોગદાન આપવાનું શરૂ કરો. અમે સરળ *ઇશ્યુઝ* સાથેના પ્રોજેક્ટોની યાદી એકત્રિત કરી છે.
-
-### વધુ સામગ્રી માટે અમારું વેબપેજ જુઓ.
-
-## અન્ય સાધનોના ઉપયોગ કરતા ટ્યુટોરીયલ
-
----
-
-Feel free to let me know if you need further modifications!
\ No newline at end of file